taifun gt clone love hate feelings towards it

[geordie_vaper]

how do i get this to not gurgle? it is the very slightest of gurgling like it is nothing really, but annoys me enough that i need to sort it,

i have tried extra cotton over the top of coils and wicks,
little amounts of cotton on the base of the build deck
lowering the coil
raising the coil

it is performing fantastic apart from this little gurgle, any advice would be welcome, thankyou

[Deleted]

I had the same problem with mine.....took the drip tip off and blew through it and this cured my problem.

[djs]

End it's existance the DJS way.

Stick it in a piece of fruit (apple, orange... LIME ???)

Put it on the wall at the end of the garden and shoot it with an air rifle.

- - -

I love mine. Done it with 3 stands of Silica or just plain coil and cotton wool.

[spikus]

geordie_vaper... I get an occasional slight gurgle with my 2 GT clones ... It normally means the bit of wick that sticks through the notch either side of the chimney piece are not quite fat enough and are allowing juice to seep into the deck ... It's a fine balance ... If you stuff too much in the slots it will strangle the wick and you'll get dry hits .... Once you get them going well they are great .... Still my favourite of all my clones

[Steve (VapeStorm)]

Just recieved my gt clone this morning, goimg to build it in a bit will keep an eye onnthis thread

[paulymeatballs]

If you vape it with the airhole facing away from you, so it's tilting towards the ceiling when you vape then the gurgle should stop.

[geordie_vaper]

sorted just used a thicker bit of cotton so it fills out the holes were the cotton comes out, am rubbish at explaining myself sorry, but all sorted and such a good vape

[Steve (VapeStorm)]

Apr 19, 2014 14:30:54 GMT geordie_vaper said:

sorted just used a thicker bit of cotton so it fills out the holes were the cotton comes out, am rubbish at explaining myself sorry, but all sorted and such a good vape

Just built mine, 2mm microcoil comkng out at 1.3ohms with cotton wool. No leaks, no gurgles just great flavour and great vapour. I think this Is my new favourite over the kayfun which cost 6× more lol

[spikus]

Excellent news geordie_vaper..... Maybe this one won't end up in the classies within a week !


Glad you are getting on with yours too Steve (VapeStorm) .... I've gotta agree with you, I like the kayfun but this beats it vape wise and the ease of filling makes a big difference...

I do t know if you two have already done it but it's well worth flipping the tank section over so that the plastic threads don't take all the wear and tear when re-filling .... Doesn't look quite as good but it means the tanks are far less likely to crack.... Here's a piccy of one of mine ...

[Steve (VapeStorm)]

spikus ive got a ss tank from fasttech looks sikastits!

[spikus]

Sorted then !! Those tanks are great ... I use one for tank crackers

[Steve (VapeStorm)]

Took a little bit of work to get it to fit. I got the b version of the gt and the tanks are for the a. But if you screw the tank on and off a little at a time grinding the threads then it gives in after a while and fits perfectly. Just make sure you wash all the steel filings off.

[geordie_vaper]

any of you chaps no a uk vendor for the steel tank sections? i only really use tank crackers and though mine would come with one

[Deleted]

Whitefog, £16.49

[geordie_vaper]

its a clone not gonna spend 20 quid on a tank sectiion when the tank cost me 28 haha!! thanks for the heads up though