Help with a Cats dripper please

[Q]

I need to get a dripper working ASAP I've got a Cats which is a quad coil, but I cant find any guides on building it, any ideas?


I've also got a Patriot but it needs the airhole drilling and I cant get a drill to go through it, what are they made of bullet proof steel??

[ruffdog]

(german i think but he builds one in vid)

(R&B background music. but again builds in vid.

[Greigster]

Jul 30, 2014 14:59:41 GMT Q said:

I need to get a dripper working ASAP I've got a Cats which is a quad coil, but I cant find any guides on building it, any ideas?


I've also got a Patriot but it needs the airhole drilling and I cant get a drill to go through it, what are they made of bullet proof steel??

Just Googled "Cats Dripper"

[ruffdog]

Greigster Beat yah to it. lol

[Greigster]

Bah ninja`d

There you have a huge choice

[ruffdog]

Q LINKS UP

[Greigster]

How great is it that we all race to help a fellow vaper? You dont even get that if you dial 999...............with the exception of the Fire and Rescue Service

[Q]

I've been searching for 'cats rebuildable atomiser' and got very little, didn't think of looking for dripper

Looks simple enough I think I'll leave it til later

Any ideas on drilling the Patriot?

Stunning response by the way

[Greg]

I thought your cat was vaping when I read the title

[Q]

I couldn't afford to supply the cats with vaping gear!!! eight of our own plus another 20 odd in the cattery at the moment

edit - actually one of them in the cattery is a bit of a dripper

[Greg]

Jul 30, 2014 15:43:26 GMT Q said:

I couldn't afford to supply the cats with vaping gear!!! eight of our own plus another 20 odd in the cattery at the moment

edit - actually one of them in the cattery is a bit of a dripper

Christ ones enough for me

[Chrissie]

And I thought you needed to put one of your cats on a drip

[Q]

I just HAD to buy this dripper when I saw the name, I had no idea what it was like... I HAD TO HAVE IT

[hijack]

Jul 30, 2014 14:59:41 GMT Q said:

I need to get a dripper working ASAP I've got a Cats which is a quad coil, but I cant find any guides on building it, any ideas?


I've also got a Patriot but it needs the airhole drilling and I cant get a drill to go through it, what are they made of bullet proof steel??

Well there are some good vids above to help you decide what to do with it.

This is my setup ATM.

Vertical coils have been best for me so far, and its not as tricky as it looks, just make the coils so the legs are 90 degrees to each other, position so that lower leg attaches to the deck, this will leave the other leg lined up to be attached to the centre post. Only screw down the leg that goes to the deck screw and just give a half wrap to the post leg and move on to the next coil.

After you have done all 4 you can tighten down the centre post and your left with something resembling a porcupine. just snip off or twist off the all those loose wires. Then check the centre post to see if snipping off all those wires hasn't made it loose and tighten it again if it needs it.

Then use tweezers to lift the coil off the deck and wick with cotton. The bottom part of the cotton can sit in the centre well and just cut the top to the same height as the centre post.

Make the tops so there is a gap between each one so you get good airflow through it. I think it adds to the flavour when the vapour flows through the gaps as the wicks are soaked in juice.

This atty is airy like no other, in less than a second you will get a lungful. I might try blocking 2 of the holes on the inside chamber to see if it tightens the airflow without reducing the vapour. If you try closing the airflow with the ring you don't get enough air hitting the coil. 

[Q]

Wow thank you hijack a very descriptive summary, the first I've seen using vertical coils, I'll have to give it a go