could something like this be used as a mod power supply

[igual]

www.kgbdeals.co.uk/national-UK/39485-portable-power-bank?aff_id=

I have no idea if it would be safe or even viable hence thought I'd ask the resident eggsperts 

[fred]

Not sure about that model, but

I'm sure robby used something similar with a pass through and vaped for about 17½ weeks on a single charge!

[robby]

It all depends on how much current it will allow, and there is no spec on the page. The powerbank I used was from FT, it took 6 18650 batteries and lasted over a fortnight There is a thread here about it ............................... if only I could find it ??? igual

[robby]

I used one of these with it

zainy.net/home/88-2-pack-mini-vv-passthrough-same-as-east-mall-.html

Wasn`t sure it would stick the pace, but it did

[robby]

allaboute-cigarettes.proboards.com/thread/24320/usb-power-bank-vaping-vapathon?page=1&scrollTo=449590

There you go igual

[VapingBad]

I would only use that to to recharge and you would need to know its output current and the max input current of your mod, if you don't know stay below 550 mA (eGos, DNAs and many other mods must not be connected to anything more powerful). Carrying spare batteries is much simpler if your e-cig uses changeable batteries.

[Ripshod]

If the USBs are 2.0 spec then the maximum power for vaping would be 2.5Watts. If they're not to spec then they should be assumed to be unsafe for anything other than the non USB outputs.

What VapingBad said

[Q]

I've been talking to someone who used one of these and a spare vamo board, he's had a few problems, but I'm thinking of trying it with a DNA30

[robby]

Aug 25, 2014 12:57:36 GMT Q said:

I've been talking to someone who used one of these and a spare vamo board, he's had a few problems, but I'm thinking of trying it with a DNA30

There is only 2Amp max out of that one, not suitable for Vamo and certainly not for DNA30

[VapingBad]

Aug 25, 2014 12:57:36 GMT Q said:

I've been talking to someone who used one of these and a spare vamo board, he's had a few problems, but I'm thinking of trying it with a DNA30

No don't do it, the DNA charging is not current regulated and can't handle over 550 mA input, IIRC you would only fry the charging board not the DNA board.

E:
Super-Shiny's thread on the subject.

[igual]

Cheers peeps its was robbys mod box that gave me the idea hence I asked as I'm after something to charge nexus 7 as well when out n about etc . but once I'mbk from ttravels was wondering if I couldout it to vapeing use hehe.

[Q]

Aug 25, 2014 13:01:16 GMT robby said:

Aug 25, 2014 12:57:36 GMT Q said:

I've been talking to someone who used one of these and a spare vamo board, he's had a few problems, but I'm thinking of trying it with a DNA30

There is only 2Amp max out of that one, not suitable for Vamo and certainly not for DNA30

Aug 25, 2014 13:17:19 GMT VapingBad said:

Aug 25, 2014 12:57:36 GMT Q said:

I've been talking to someone who used one of these and a spare vamo board, he's had a few problems, but I'm thinking of trying it with a DNA30

No don't do it, the DNA charging is not current regulated and can't handle over 550 mA input, IIRC you would only fry the charging board not the DNA board.

E:
Super-Shiny's thread on the subject.

I wasn't looking to use it as it stands, the idea is to drop it down to 2x batteries running the DNA, removing the batteries for charging but keeping the option of using it as a power pack