Need some help guys please

[Pacer]

I can’t find the replacement heads for the Anyvape Davide… I have found the BVC but I think I use the BDC could someone please tell me the difference? And if the BVC will fit the Large David’e? not the mega.

Many kind thanks

www.ebay.co.uk/itm/GENUINE-ASPIRE-BDC-BVC-DUAL-COIL-REPLACEMENT-COILS-ET-S-Vivi-CE5-1-8-2-1-OHM/251532844425?_trksid=p2054897.c100204.m3164&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140407115239%26meid%3D72099025f5774ef596f15b68dff2b950%26pid%3D100204%26prg%3D20140407115239%26rk%3D3%26rkt%3D20%26sd%3D271476564327


Edit if anyone know a trusted vendor I would much prefer them to E bay. Usually get them from P Vapour, but out of stock cant find them on Sadie’s web-site. I'm getting desperate.

[Q]

I dont know the answer BUT I LOVE your avatar

[Pacer]

(Bump) Anybody help please?

[Greg]

I thought a standard Evod BDC was compatible withe Davide. Been a while since I used either though.

@johanino is the Davide queen though, she's likely to be able to point you in the right direction

[Perpetua]

I use Evod/Protank heads in my Mini Davide Pacer.

[Mrsmac]

Hi there, BDC stands for bottom dual coil. BVC stands for bottom vertical coil. Basically the col arrangement inside the head is different as the Bdc runs horizontally and the BVC runs vertically. From my knowledge the aspires use the BDC as well as Kanger single coils (protank)

Pvaper have them in stock here: www.p-vaper.co.uk/Aspire/Davide-BDC-Dual-Coils-5-PACK

Not sure if the older aspires can take the BVC coil though

[Pacer]

Perpetua, many thanks, where do you get yours from?

Mrsmac, many kind thanks for the clear information, at least I now know the what the difference is from BDC & BVC just checked P vapour and the ones I have 1.8 Ohm’s are still out of stock. many thanks for the help.

[Mrsmac]

A little pricey but www.ivapour-elixir.co.uk/atomisers/aspire-bdcc-bottom-dual-coil-changeable-clearomisers/aspire-bdc-coil-head-2098.html

www.ukecigcabin.com/product/aspire-coil

Hope that helps

[lisburnvapes]

Pacer , if it's the same Davide tank that I have you can remove the centre metal section near the base, remove the small grommet in the tank then use standard kanger heads.
If you recoil your own with micro and cotton you will hardly notice any difference , except in cost........, far cheaper ! Hope this helps

[dreamylittledream]

The BVC heads are the latest version of the Aspire heads - all Aspire tanks that use the older BDC heads can also use the newer BVC ones (they look identical). The BVC ones will work fine in a Davide (well apart from the very first version which needs a BDC adaptor but if you were using the BDC coils before you have the second version). They are basically the same as the mini nautilus heads but the right size to fit the smaller Aspire tanks (and the Davide).

The main difference is the BVC heads are fantastic, in a completely different league to the BDC ones which are okay but are dreadfully erratic at wicking. Personally I think the BVC coils are best pre made coils you can buy full stop end of story. Personally I prefer them to a micro coil with cotton, although they do work out somewhat more expensive (as you can get months out of a Naturevape/Virtual Vapes coil if you are gentle with it and rewick, vs about a fortnight from a BVC.

Anyway cheapest place for the BVC heads I've found is Vapercaper - use discount UKV10 for 10% off and its free shipping

www.vapercaper.co.uk/products/aspire-bvc-replacement-heads-for-standard-aspire-clearomisers

They do BDC coils too at the same price

[Perpetua]

Oct 15, 2014 8:41:28 GMT Pacer said:

Perpetua, many thanks, where do you get yours from?

I've stocked up with heads from FT Pacer:

www.fasttech.com/p/1476404

www.fasttech.com/products/0/10004696/1634200-replacement-coil-heads-for-evod-clearomizer-5-pack

And I use their ready coils to re-wick with as I can't be doing with winding my own coils right now:

www.fasttech.com/p/1591806

Just laying a small piece of rayon/silica/cottonwool over the top - not everyone's idea of re-coiling, but it does me nicely.

[Deleted]

I've been away from the interwebby @pacer

Protank 2 heads should fit and you can rewick them

Love my davide. Didn't take davide on short break with me - paid for it with burnt wick

Not even £shop e-liquid could fix that!!!!

Protank 2 heads? Hmm...china is an option

also something like this - ebnferro.com/5pc-coil-heads-for-kanger-evod-and-protank-2-2ohm

Should do the job nicely and be with you in less than a week

[Pacer]

Thanks for all the help, actually ordered 2 boxes from these guys www.vapercaper.co.uk/products/aspire-bvc-replacement-heads-for-standard-aspire-clearomisers

But now thinking of ordering 5 boxes from Fasttech

www.fasttech.com/products/0/10009799/1859405-authentic-aspire-bvc-clearomizer-replacement-coil

[Deleted]

I'm just thinking? Does not e-cig wizard next to the NHS place have them near you Pacer

[clairea]

The ukecig store has the right replacement heads in stock for under a fiver and I think the have a discount code as well