Troll Rda on its way

[Deleted]

So i bought a troll rda second hand its on its way to me
who has one of these and what builds do you like to
put in them flavour and a little clouds

would be nice see what setups you folks that have one
need see some pics thanks

[lairey]

A dual coil with 6 or 7 wraps round a 3mm mandrel with 0.4mm kanthal comes out at around 0.6ohms and is great in the troll. I tend to only have the airflow 2/3 open and I don't use the chuff cap on it, but even then, it's the airiest thing I have. I do love it though.

I'll take a pic later, when I've had a chance to dry burn and re-wick as it's pretty gunky right now

[Deleted]

nice one lairey thanks if you ever want to get rid of chuff cap let me know is it the black or white one

[lairey]

Here you go @zuza... just dry burned and re-wicked and it's vaping like a champ

[Deleted]

Apr 21, 2015 11:06:05 GMT lairey said:

Here you go @zuza... just dry burned and re-wicked and it's vaping like a champ

nice and in centre really like how centre post has 2 post holes make it alot easier

[lairey]

Apr 21, 2015 11:14:23 GMT @zuza said:

Apr 21, 2015 11:06:05 GMT lairey said:

Here you go @zuza... just dry burned and re-wicked and it's vaping like a champ

nice and in centre really like how centre post has 2 post holes make it alot easier

Try to get the coils quite high @zuza, the flavour is much better then

[Deleted]

Apr 21, 2015 11:16:24 GMT lairey said:

Apr 21, 2015 11:14:23 GMT @zuza said:

nice and in centre really like how centre post has 2 post holes make it alot easier

Try to get the coils quite high @zuza, the flavour is much better then

thanks for advice cant wait till arrives test it out

[lairey]

Apr 21, 2015 11:19:47 GMT @zuza said:

Apr 21, 2015 11:16:24 GMT lairey said:

Try to get the coils quite high @zuza, the flavour is much better then

thanks for advice cant wait till arrives test it out

I'd be very surprised if you didn't love it.  I tend to almost stuff the well with the long tails of the wick, so I can get loads of juice in with no leaks - get about 8 or 9 good lung fulls between dripping 

[Deleted]

nice when it arrives will post up pics of my setup ... they never straight all a little wonky but it vapes

[Deleted]

lairey my mate is sending me a foot of hotwires 26g some cotton bacon and fibre freaks to try no bad for a price of a stamp
so a fun day with troll i think when it all arrives

[Get Off My Cloud]

Sweet, keep meaning to get one of those Troll's always seem to forget though

[Deleted]

Apr 21, 2015 13:23:08 GMT Get Off My Cloud said:

Sweet, keep meaning to get one of those Troll's always seem to forget though

i was lucky picked up one second hand £10  but they are at m-vapes for £15 delivered bargain for an authentic dripper

[*-SARIN-*]

A decent dripper, massive airflow, i like others only have the airflow open 2/3 of the way. I've had it down to 0.08 without any issues and it chucks clouds without even a hint of heat on the vapour.

[Deleted]

Apr 21, 2015 15:17:50 GMT *-SARIN-* said:

A decent dripper, massive airflow, i like others only have the airflow open 2/3 of the way. I've had it down to 0.08 without any issues and it chucks clouds without even a hint of heat on the vapour.

nice unsure i will go that low but gotta try it you know for science

[*-SARIN-*]

Apr 21, 2015 15:21:22 GMT @zuza said:

Apr 21, 2015 15:17:50 GMT *-SARIN-* said:

A decent dripper, massive airflow, i like others only have the airflow open 2/3 of the way. I've had it down to 0.08 without any issues and it chucks clouds without even a hint of heat on the vapour.

nice unsure i will go that low but gotta try it you know for science

The post holes will take 24AWG parallels but i dislike the tiny allen key screws.  Who carries an allen key with them?