Anyvape Furytank - subohm with Top Fill!

[digicig]

Noticed Anyvape's FB page was offering a free Give-away - so duly complied to the like/comment/share thing - and today - Voila! - it arrived via DHL



Swiftly swapped out the stock coil, dug out the pre-wicked RBA head (like the reviews, trimmed down the immense amount of cotton to a more reasonable amount), and primed it nicely. Then tried out the Top Fill 'pump' system - which is actually pretty nifty and simple - filled and Ready to Vape!

The Furytank has 4 air slots (which might adjust an ickle too easily) as well as an air slot for the Drip Tip (so lips shouldn't get as burnt), so a lot of adjustment to thy vape possible. It's roughly the size of the Kanger ST mini, possibly being a tad wider. It sits nicely on me iStick 50w though.



The pre-made rba coil came in at 0.6Ohms - and Rocks! Only having used the Kanger ST mini in SubOhming (joys of being away) got to say the Furytank, out of the box, appears to be Excellent. The pre-made coil, stormed through the watts, and with all the air slots open, could handle the full 50w's on offer - without tasting overly burnt. At my more modest preference of around 23.5w, it's a very flavoursome, warm vape with plenty of Vapour Production.

As a 1st lookie (2 hours in) i'd say that the Furytank could well be replacing me Kanger mini - especially with the Top Fill option. I'll see over the next few days how it does for leakage etc and do a more objective review in a week or so.

Allowing for the fact i got this free, but not for a review per se, i'm liking the Furytank, and according to what i've found elsewhere, like the Davide before it, the Ft will accept different stock heads, like the Aspire Nautilus v2's, which makes it a bit of a gem.

Should just add, that the FuryTank comes with a spare pyrex tank, the rba pre-wicked base, a couple of premade coils, cotton, the generic blue screwdriver, and a stock head (with dual scissor coils - in a cross).

[DiscoDes]

Nice review digicig

[Get Off My Cloud]

How is the RBA head constructed on this one?
The RBA on their last tank the Segatank was useless the posts were just press fitted and ended up falling off the first time i tried fitting a coil.
The rest of the tank was great but the RBA was useless.

[digicig]

TBH didn't look too closely - just trimmed the wick down and primed - too eager to vape
Will include that in me review proper but add it to this once i've enjoyed playing a but more

[digicig]

The RBA deck is pretty tight - and fiddly - compared to the Kanger ST mini (which is about the easiest RBA deck i've used. Will try playing over the next few days and see how it goes.
Broke the golden rule - if somethings working well DON'T TOUCH it - to have a lookie

BTW - sits well on the KBox - must be the extra long copper pin

[digicig]

Actually measured the capacity via top fill - and it took 4ml and not the 5ml advertised (the Kanger mini holds 3ish, up to the 'no-leak' mark, in comparison) - so feel a tad better about the number of times i've filled it

[digicig]

So popped in the stock head - 0.3 Ohms (as measured by me iStick 50w) - and pretty tasty Cloud maker

[digicig]

Starting to get infuriated with the RBA head in the Furytank
I freely admit to not being the most able rebuilder, however, i'm not exactly incapable or inexperienced. So far, i've made several attempts to make me own coil and getting it wrapped around the posts is proving to be most annoying.
Still liking the vape from the Ft, with the stock 0.3 Ohm head - and the Top Fill and air flow control - but for the RBA side the Kanger ST mini wins hands down thus far.

[digicig]

Quick update - still not got the RBA set up - assuming 'User Error' still at this point but

T'other thing, as previously mentioned, the airflow control can move with handling relatively easily - so worth keeping an eye on

Aside from that, tried an experiment as noticed in other posts - changed me juice from 6-7mg upto 24mg - and instead of going throough 4+ fills - still on the 1st tank over a day later
No massive nic head - if i take a short pull as and when required - and not my ideal vaping technique - but certainly does the job
Later at night i then swapped to the 7mg in s KST mini, for a more pleasurable vape and so as to ease my way to sleep.
Definitely worth consifering as far as my juice consumption goes - from 10-15ml a day to around 5ml - including the lower mg switch - so one for the wallet!

[Get Off My Cloud]

It is the same RBA as the SegaTank, here's a pic of mine after the first time trying to recoil it, the same thing also happened to the owner of the shop i got it from, the negative post is press fitted on a tiny pin that isn't even very deep.
I was hoping they would have changed the design for this tank but now i know they haven't, i even wrote to Anyvape directly about it when it happened to me months ago and sent them pictures.

[digicig]

Cheers droog - kept meaning to post thee a pic - but frustration and not having t'interweb where i actually live meant i hadn't got around to it - was hoping to show a build in it i'd made myself 1st too

With the 0.3 Ohm stock head it's still good - though a tad too fierce (in ya face) for my preference - but still on the 1st tank of 24mg using it as my main vape - which is excellent for my juice consumption

As to the buiding - think the KST mini beats it hands down - not too fiddly, can do a 2.5-3mm coil (so easy to insert cotton) and 1-1.5 Ohms is spot on for me

[digicig]

7 weeks on - and still using the original 0.3 ohm stock head - taste and VP still good.
Given up on trying to rebuild the RBA section - too small and fiddly - and tbh was waiting for the stock head to give up the ghost before trying again, which hasn't happened - yet!
It's had a tank a day through it - using 24mg juice @ 40Wish - so quite well used. The high Nic has reduced my juice consumption significantly (12+ to 5ish ml Day), which was the plan.
Still awaiting the arrival of some Aspire coils to see if they are compatible.

Overall, i've been very happy with the Furytank: I like that i can adjust the air intake at the coil end to low, to increase flavour production, and then the air-intake below the drip tip to make it cool enough for me to enjoy at high W's without it burning me lips. Add top fill to that and the longevity of the stock head and it works for me!

Now seen the Furytank on Amazon.co.uk for £16.99 + postage

Just to add:
No leaks on mine at all - even though has been thrown in me bag etc - the long pin does mean it fits just about anything, but a mod may require having it's pin pulled after if using anything else

[minime]

Just to add to this I think this tank is fantastic and I'm having very good results with the RBA to, just a little heads up for if you have a aspire tryton and are getting frustrated with how shit the RBA is on it the fury tank RBA fits the tryton and works really well.

[digicig]

Thanks minime - tbh as the stcok head has been so good (just started tasting dodgy the day after the vid) - and happy with the KST mini for the RBA - unless i can get one in China i'll prorbably be fine.
Pushing it for receiving stuff by post now before i go

[minime]

Yes the stock heads are fantastic for flavour I love this tank so much iv been and got another, my problem is the b&m I got my furytank from don't stock the stock coils yet mind I'm still going good on the first one after 4 week's use. Think your thread on ukv is broken it wouldn't let me post on it lol.