single coil rta for tc help

[decoy]

got some free juice so want to get a tank with the £16 saved

ive got a kfl ,rose and subtank but was wondering what else is good

[tim]

Lemo 2 or Cthulhu decoy. Both have It has good airflow and good juice flow.

That's dual coil, soz

[lairey]

The new Goblin mini has an adapter so that you can use it with either single or dual coil. Not got mine yet (it's on its way) but I've tried a colleague's and it's a cracking little tank

[drunkenbum]

Is there enough space in the goblin mini to fit a nickel coil comfortably lairey?

[lairey]

Jul 27, 2015 19:57:04 GMT drunkenbum said:

Is there enough space in the goblin mini to fit a nickel coil comfortably lairey?

Actually, thinking about it, maybe not... it is a very small deck...  Tom have you tried a nickel coil in the Goblin?

[drunkenbum]

Jul 27, 2015 21:37:48 GMT lairey said:

Jul 27, 2015 19:57:04 GMT drunkenbum said:

Is there enough space in the goblin mini to fit a nickel coil comfortably lairey?

Actually, thinking about it, maybe not... it is a very small deck...  Tom have you tried a nickel coil in the Goblin?

I think I might hold off until I can find that out. I love the look of them but want to use it with a nickel build

[glen]

Jul 27, 2015 22:05:25 GMT drunkenbum said:

Jul 27, 2015 21:37:48 GMT lairey said:

Actually, thinking about it, maybe not... it is a very small deck...  Tom have you tried a nickel coil in the Goblin?

I think I might hold off until I can find that out. I love the look of them but want to use it with a nickel build

Will let you know when my one from fasttech turns up

[lairey]

Jul 27, 2015 22:05:25 GMT drunkenbum said:

Jul 27, 2015 21:37:48 GMT lairey said:

Actually, thinking about it, maybe not... it is a very small deck...  Tom have you tried a nickel coil in the Goblin?

I think I might hold off until I can find that out. I love the look of them but want to use it with a nickel build

I'll try when my one arrives

[Tom]

Jul 27, 2015 21:37:48 GMT lairey said:

Jul 27, 2015 19:57:04 GMT drunkenbum said:

Is there enough space in the goblin mini to fit a nickel coil comfortably lairey?

Actually, thinking about it, maybe not... it is a very small deck...  Tom have you tried a nickel coil in the Goblin?

Ive been nickel'ing the billows which is pretty much the same.

The trick for me is using a m2.5 screw makes it a piece of cake

[chykensa]

As this thread has the attention of the Nickelites, could you answer a simple question for me please?
If I put a .32 Ni200 coil, 12 wraps around a 3.5 diameter former, would that be about right to install in say a Kayfun or Taifun? Still contemplating dabbling my toes in the Nickel build territory as I now have a mod with TC
Thanks in advance, and apologies if this hijacks the thread . . .

Edit: According to Steam Engine, this should give me a .2ohm coil - will this work with TC OK?

[glen]

Jul 27, 2015 23:05:06 GMT chykensa said:

As this thread has the attention of the Nickelites, could you answer asa simple question for me please?
If I put a .32 Ni200 coil, 12 wraps around a 3.5 diameter former, would that be about right to install in say a Kayfun or Taifun? Still contemplating dabbling my toes in the Nickel build territory as I now have a mod with TC
Thanks in advance, and apologies if this hijacks the thread . . .

Edit: According to Steam Engine, this should give me a .2ohm coil - will this work with TC OK?

I use 32 about 9 wraps around 3.5 diameter and depending on how tight i get the coil i get between 0.17 and 0.23
seems to work fine in my kayfuns
hope this helps

[chykensa]

Jul 27, 2015 23:16:20 GMT glen said:

Jul 27, 2015 23:05:06 GMT chykensa said:

As this thread has the attention of the Nickelites, could you answer asa simple question for me please?
If I put a .32 Ni200 coil, 12 wraps around a 3.5 diameter former, would that be about right to install in say a Kayfun or Taifun? Still contemplating dabbling my toes in the Nickel build territory as I now have a mod with TC
Thanks in advance, and apologies if this hijacks the thread . . .

Edit: According to Steam Engine, this should give me a .2ohm coil - will this work with TC OK?

I use 32 about 9 wraps around 3.5 diameter and depending on how tight i get the coil i get between 0.17 and 0.23
seems to work fine in my kayfuns
hope this helps

It most certainly does, glen - cheers my friend!!

[glen]

Jul 27, 2015 23:17:56 GMT chykensa said:

Jul 27, 2015 23:16:20 GMT glen said:

I use 32 about 9 wraps around 3.5 diameter and depending on how tight i get the coil i get between 0.17 and 0.23
seems to work fine in my kayfuns
hope this helps

It most certainly does, glen - cheers my friend!!

Glad to be of assistance

[MRS SLEEPY]

I build mine 28mm (29awg) tempered. 12 wraps on Taifun comes out 0.15. on2.5 m

[chykensa]

Thank you MRS SLEEPY, that gives me another option to consider as well