Tfv4

[flavourtank]

Right I'm getting annoyed with this.

I've stuck the triple head in last night filled it up and it pissed juice overnight. So I took my other tfv4 stuck the same triple head in and that's gone and pissed juice out.

I've made sure coil is in tight but that ain't helped.

Any advise to cure this piss **** tank?

[Get Off My Cloud]

Missing o-ring on base of coil?

[*-SARIN-*]

^^^ This. I have had zero issues with mine, in fact it is about the only tank that i own that doesn't piss juice.

[flavourtank]

Aug 27, 2015 11:27:57 GMT Get Off My Cloud said:

Missing o-ring on base of coil?

the tanks in cleaning at mo but will have a look in a min thanks

[flavourtank]

Get Off My Cloud it has the oring

[Get Off My Cloud]

flavourtank mines full of juice right now but from memory the only other seals on the tank are the translucent white one on the base to seal the glass, another o-ring at the top to seal the glass at the top, a black one that fits inside the glass and i think there is one on the bottom of the chimney stem too.

I'm not sure how it could be a fault with the coil head but to rule it out i would put one of the other heads in and fill the tank with water to see if it leaks.
If it doesn't then there's something wrong with your coil head, if it does then there's a problem with one of the seals on the tank.

[flavourtank]

Aug 27, 2015 14:38:45 GMT Get Off My Cloud said:

flavourtank mines full of juice right now but from memory the only other seals on the tank are the translucent white one on the base to seal the glass, another o-ring at the top to seal the glass at the top, a black one that fits inside the glass and i think there is one on the bottom of the chimney stem too.

I'm not sure how it could be a fault with the coil head but to rule it out i would put one of the other heads in and fill the tank with water to see if it leaks.
If it doesn't then there's something wrong with your coil head, if it does then there's a problem with one of the seals on the tank.

I'll have a look later, thanks for the info

[Deleted]

Get Off My Cloud can this be used with a hybrid top cap?

[Get Off My Cloud]

Aug 28, 2015 19:28:33 GMT @jc72 said:

Get Off My Cloud can this be used with a hybrid top cap?

I wouldn't it has a fixed centre pin, it does protrude very slightly but it could easily be pushed in if you crank it down hard on a battery.

[Deleted]

Aug 28, 2015 20:56:37 GMT Get Off My Cloud said:

Aug 28, 2015 19:28:33 GMT @jc72 said:

Get Off My Cloud can this be used with a hybrid top cap?

I wouldn't it has a fixed centre pin, it does protrude very slightly but it could easily be pushed in if you crank it down hard on a battery.

Thought as much.  Suppose if I got one I could use a heatsink to bridge the gap if I wanted to use it on my hybrid mods. Thanks.

[Deleted]

Mines never leaked either, but i did see someone with the same issue i think it was on POTV if thats any help.

[Get Off My Cloud]

Aug 28, 2015 21:23:56 GMT @jc72 said:

Aug 28, 2015 20:56:37 GMT Get Off My Cloud said:

I wouldn't it has a fixed centre pin, it does protrude very slightly but it could easily be pushed in if you crank it down hard on a battery.

Thought as much.  Suppose if I got one I could use a heatsink to bridge the gap if I wanted to use it on my hybrid mods. Thanks.

Keep in mind it's a 24.5mm tank, might be a bit of a job finding a heatsink the right size.

[Deleted]

Aug 28, 2015 21:46:33 GMT Get Off My Cloud said:

Aug 28, 2015 21:23:56 GMT @jc72 said:

Thought as much.  Suppose if I got one I could use a heatsink to bridge the gap if I wanted to use it on my hybrid mods. Thanks.

Keep in mind it's a 24.5mm tank, might be a bit of a job finding a heatsink the right size.

oh no is it. I didn't realize that. Sod that then lol