Recommend a good bottom feeder 22mm atty

[Deleted]

So whats the best 22mm bottom feeder currently available. 
Not really a dual coil person but like good airflow as i only do lung hits now.

[tim]

Velocity

Might be 23mm though, can't remember @windows

Edit It's 22mm www.fasttech.com/products/2482500

I have one. It comes with a BF pin.

[phtumshk]

V3 hobo from FT.
Appears to have a hollow pin in the pics.
Is it the best , I couldnt say but it looks a lot better than the V1 & that was pretty good.

[VapingBad]

Aug 29, 2015 23:05:29 GMT tim said:

Velocity

Might be 23mm though, can't remember @windows

Edit It's 22mm www.fasttech.com/products/2482500

I have one. It comes with a BF pin.

They are dual coil, but about the easiest thing to do dual coils in, worth getting especially if you want vary high power temp limiting builds.

Origin V2 or V3 can do both dual and single coils, but have to mod yourself or get the hollow pin to bf.

[phatfil]

Aug 29, 2015 23:56:07 GMT phtumshk said:

V3 hobo from FT.
Appears to have a hollow pin in the pics.
Is it the best , I couldnt say but it looks a lot better than the V1 & that was pretty good.

the hobo3 juice path is out thru the top of the hollow +ve pin, so it wont drain back into the bottle till the thing contains a good few ml of juice..

imho look for something with a lower juice in/out port perhaps?? OR consider modding with a carefully drilled diagonal hole into the hollow +ve pin on a suitable atty bearing in mind the hole will mean the +ve Hollow screw cant be adjusted..

[unclegromit]

+1 for the Origen V3. Worth every penny for the flavour.

[phtumshk]

Aug 30, 2015 0:28:43 GMT phatfil said:

Aug 29, 2015 23:56:07 GMT phtumshk said:

V3 hobo from FT.
Appears to have a hollow pin in the pics.
Is it the best , I couldnt say but it looks a lot better than the V1 & that was pretty good.

the hobo3 juice path is out thru the top of the hollow +ve pin, so it wont drain back into the bottle till the thing contains a good few ml of juice..

imho look for something with a lower juice in/out port perhaps?? OR consider modding with a carefully drilled diagonal hole into the hollow +ve pin on a suitable atty bearing in mind the hole will mean the +ve Hollow screw cant be adjusted..

well spotted phatfil

[Deleted]

Another vote for the Velocity from FT with B/F pin, cracking atty