Bit the bullet

[Deleted]

well i wanted to try out all this temp control stuff

so just bought the ipv d2 and goblin mini nice little stealth setup am sure 
not bad £52 all in for the kit 

now to get wire sorted and am set 

what wire do you use robby or Q in your tanks 

[Q]

I haven't built a Ni200 coil yet, I'm using stock coils in my subtanks

[Deleted]

Q am just a little lost what ni200 wire to buy for tank use
may just cheat and buy ready mades from ft

will this be the right one to buy 

Hard Finish - NI200 Wire (99% Nickel) - 0.32mm (320 Micron - 28 AWG) - 10 Metre Spool

www.vape-atomizer-mesh.com/products/Hard-Finish---NI200-Wire--99--Nickel----0.32mm--320-Micron---28-AWG----10-Metre-Spool-2793.html

[VapingBad]

IIWY @zuza I would get the tempered from StealthVape, don't forget to add the free stuff to your order and select rebuildable supplies delivery rate.

[Deleted]

Sept 4, 2015 17:43:02 GMT VapingBad said:

IIWY @zuza I would get the tempered from StealthVape, don't forget to add the free stuff to your order and select rebuildable supplies delivery rate.

nice one was also looking at stealthvape 
also found a nice guide on youtube for building nickle build in goblin 

[glen]

What VapingBad said @zuza,
And can you please change your avatar, as its scaring the bejezus out of me lol

[VapingBad]

Sept 4, 2015 17:45:23 GMT glen said:

What VapingBad said @zuza,
And can you please change your avatar, as its scaring the bejezus out of me lol

And I was sure your were a Belieber

[Deleted]

Sept 4, 2015 17:45:23 GMT glen said:

What VapingBad said @zuza,
And can you please change your avatar, as its scaring the bejezus out of me lol

have no fear off jihad bieber lol glen 

will i go for 0.30mm or 0.32mm out of stock of 10m spools

[VapingBad]

Sept 4, 2015 17:48:41 GMT @zuza said:

Sept 4, 2015 17:45:23 GMT glen said:

What VapingBad said @zuza,
And can you please change your avatar, as its scaring the bejezus out of me lol

have no fear off jihad bieber lol glen 

will i go for 0.30mm or 0.32mm out of stock of 10m spools

0.3 will give a fraction more scope, sometimes it is harder to get the resistance high enough for some mods.

[Deleted]

Sept 4, 2015 17:53:33 GMT VapingBad said:

Sept 4, 2015 17:48:41 GMT @zuza said:

have no fear off jihad bieber lol glen 

will i go for 0.30mm or 0.32mm out of stock of 10m spools

0.3 will give a fraction more scope, sometimes it is harder to get the resistance high enough for some mods.

cool this is like starting vaping again from the start all this temp control stuff buying 25m of 0.3mm 
as thats all instock oh and my free wire also 

now one last thing what would be a nice ohm build make my juice last long on the 3ml tank

[VapingBad]

Sept 4, 2015 17:59:19 GMT @zuza said:

Sept 4, 2015 17:53:33 GMT VapingBad said:

0.3 will give a fraction more scope, sometimes it is harder to get the resistance high enough for some mods.

cool this is like starting vaping again from the start all this temp control stuff buying 25m of 0.3mm 
as thats all instock oh and my free wire also 

now one last thing what would be a nice ohm build make my juice last long on the 3ml tank

free muji & vape band

[Deleted]

Sept 4, 2015 18:03:31 GMT VapingBad said:

Sept 4, 2015 17:59:19 GMT @zuza said:

cool this is like starting vaping again from the start all this temp control stuff buying 25m of 0.3mm 
as thats all instock oh and my free wire also 

now one last thing what would be a nice ohm build make my juice last long on the 3ml tank

free muji & vape band

oh i searched for free all showed was wire now after order found muji was free 

vape band would have come in handy protect the glass on goblin

[robby]

Sept 4, 2015 15:51:44 GMT @zuza said:

well i wanted to try out all this temp control stuff

so just bought the ipv d2 and goblin mini nice little stealth setup am sure 
not bad £52 all in for the kit 

now to get wire sorted and am set 

what wire do you use robby or Q in your tanks 

So far I have only used .2mm and .25mm nickel, and some .5mm titanium. I generally only use simple, slightly spaced 3.5mm coils (6,7 or8 wraps). Getting fantastic flavour in a dripper. I have tried double coiling them but prefer the single coil setup at about 18 watts TC. Must get some SS wire for the XCube 2 now that they have updated the firmware to use it

[Deleted]

what ohm builds you do in temp mode robby am looking for a nice build in a tank that wont guzzle the juice like no tommorow

[hijack]

Sept 4, 2015 15:51:44 GMT @zuza said:

so just bought the ipv d2 and goblin mini nice little stealth setup am sure 
not bad £52 all in for the kit 

I have these 2 on order as well.....where did you order from @zuza. That sounds almost a China price.