talk me out of this lol

[decoy]

www.fasttech.com/products/3024/10011697/9648654-yftk-bb-style-60w-all-in-one-box-mod-kit
billet box clone
always kinda liked the look of these but have no clue about them
how do you fill the thing
how do you change the coil
what cheapish mtl rba,s are about for it
what problems can you get with them
can you charge the batt in the mod
as  you can see i dont know anything about them but know a few peps on here like them ;p

[unclegromit]

Oh Pepperty where are you?
A kind soul needs your assistance. 🙂

[phtumshk]

thats the exact 1 im buyin in a couple of weeks.
legit dna in it.
The exocet is a good RBA but these are all the rage these days.
No in mod charging.

[glen]

I'll try and explain a few things decoy
No usb charging
Plenty of clone atomisers available, exocet, insider, etc
You fill by sliding down the glass on the boro (tank section)
You can get bridges allowing you to use stock coils, nautilus, kanger etc
You can get a bit of condensation as everything is behind the panels, but nothing too serious
The whole atomiser can be removed by taking the glass out of the boro
Can't think of anything else
Hope that helps

[decoy]

May 6, 2018 21:31:52 GMT glen said:

I'll try and explain a few things decoy
No usb charging
Plenty of clone atomisers available, exocet, insider, etc
You fill by sliding down the glass on the boro (tank section)
You can get bridges allowing you to use stock coils, nautilus, kanger etc
You can get a bit of condensation as everything is behind the panels, but nothing too serious
The whole atomiser can be removed by taking the glass out of the boro
Can't think of anything else
Hope that helps

when you say atomiser can be taken out is it screwed in or do it pop in and what would you recomend for mtl 
thankyou

[Get Off My Cloud]

Filling, pull the side panel off, slide down the glass on the tank, fill, slide glass back and pop panel back on.

Changing coil. pull off drip tip use a coin or other tool to unscrew the nut on the top, remove panel, tank is now free to drop out, remove glass, push chimney up to separate it from the RBA unit, now you can remove the RBA to change coil/wick.

RBA's
Insider RBA
Exocet RBA
Vape Shell RBA


Yes battery is removable single 18650, no onboard charging though.

Problems, needing a separate charger, can't see tank unless you remove panel so you need to be careful of running dry, not much cop if you want to run a DTL setup, at best you're going to get a very restrictive lung hit.

[glen]

May 6, 2018 21:40:34 GMT decoy said:

May 6, 2018 21:31:52 GMT glen said:

I'll try and explain a few things decoy
No usb charging
Plenty of clone atomisers available, exocet, insider, etc
You fill by sliding down the glass on the boro (tank section)
You can get bridges allowing you to use stock coils, nautilus, kanger etc
You can get a bit of condensation as everything is behind the panels, but nothing too serious
The whole atomiser can be removed by taking the glass out of the boro
Can't think of anything else
Hope that helps

when you say atomiser can be taken out is it screwed in or do it pop in and what would you recomend for mtl 
thankyou

The removal of the atty has been explained much better than me in the above post, most have an adjustable afc ring p, so you can close them all down, but none are a super tight mtl, but you can still get a nice mtl vape out of them

[decoy]

May 6, 2018 21:22:16 GMT phtumshk said:

thats the exact 1 im buyin in a couple of weeks.
legit dna in it.
The exocet is a good RBA but these are all the rage these days.
No in mod charging.

ive wanted one for long time but it dont offer much difference to kit ive got performance wize so its stayed as a wont and not need lol
got bounus from work so im trying to talk my self outa it spesh as its such a faff to connet it to escribe
hopefully they wl do a map coad on it soon and then i can just buy it and work out how it work when i get it lol

[decoy]

cheers guys
changeing the atomizer sounds a bit off a faff but hopefully wont be messing with it to often
still not talked outa it lol

[GunJack]

FFS decoy dont waste the cash!!!!!

Hows that??

[Get Off My Cloud]

Forgot another drawback, you can't dry burn to clean or bed in the coil to get rid of hotspots on the device unless you go through the hassle of fitting the coil, putting the RBA back together, putting the RBA back in the tank, putting the tank back in, screwing the nut back and firing the thing with no juice in.
Obviously doing this means you can't see or touch the coil while firing and if you're cleaning the coil you're tank is gonna get ash in it.
Not much of a big deal if you're at home and have access to something else you can fire the coils on but if you're away somewhere and it's the only device you have with you it's a little extra hassle.

[Perpetua]

Thank you decoy . . . . I've just put one in my cart along with the Vape Shell.

[paulw]

decoy LIVIN5 gets you 5% off mate

[DaveJ]

Hehe .. decoy I don't reckon these people have talked you out of buying anything.

I reckon you should just poke your credit card number into your puter and buy 'em!

[beedee]

A quick fast forward through this will tell you most of what you need to know, decoy



I love mine.

Sorry, forgot you want talking out of buying it - the best I can do is say that all not buying it will get you is that you will be billetboxless!