euan2004
New Member
Joined:September 2013
Posts: 5
Location:
Likes: 4
Recent Posts
Last Online Sept 23, 2013 1:05:00 GMT
|
Post by euan2004 on Sept 23, 2013 0:53:47 GMT
Anyone know if the cosmetic cotton wool balls (100% pure cotton) is safe for wicking? got some in the Kayfun at the moment. euan2004It is recommended that you use organic as opposed to standard/cosmetic as the cotton in cosmetic cotton wool is treated with chemicals. wether that is 100% true, i could not tell you. Just been mentioned in threads on other forums.
|
|
euan2004
New Member
Joined:September 2013
Posts: 5
Location:
Likes: 4
Recent Posts
Last Online Sept 23, 2013 1:05:00 GMT
|
Post by euan2004 on Sept 21, 2013 0:30:29 GMT
Tips i would suggest for using cotton 1 - use non treated/organic as many contain chemicals for treating. 2 - dont use too much. remember you still need a path from air supply to coil then passage to mouthpiece 3 - DO NOT DRY BURN. please see pBusardos video on microcoils if you want a demonstration if not looking for demonstration, flaming mesh will oxidise, flaming silica will burn any excess oils, flaming cotton wool will create a fireball. Tips for coiling 1 - use a decent size drill bit/similar implement to start with 2 - use at least .28 if doing more than 5 wraps and looking for 1.2-2 ohms 3 - use the pinch method once flamed on the drill bit hopefully this helps someone
|
|
euan2004
New Member
Joined:September 2013
Posts: 5
Location:
Likes: 4
Recent Posts
Last Online Sept 23, 2013 1:05:00 GMT
|
Post by euan2004 on Sept 20, 2013 23:53:17 GMT
personally i would stick to the known on this one, especially since there is copper involved. With the Fogger coming in at £30 i would suggest perhaps investing a little bit more. If Todds review and continual ramblings (his words) are to go by then may be more than worth it
|
|
euan2004
New Member
Joined:September 2013
Posts: 5
Location:
Likes: 4
Recent Posts
Last Online Sept 23, 2013 1:05:00 GMT
|
Post by euan2004 on Sept 20, 2013 22:05:28 GMT
12 replys to a Hi thread, this really is a friendly forum. living up to standards guys and gals
|
|
euan2004
New Member
Joined:September 2013
Posts: 5
Location:
Likes: 4
Recent Posts
Last Online Sept 23, 2013 1:05:00 GMT
|
Post by euan2004 on Sept 20, 2013 21:16:39 GMT
Hi guys, Thought i would give a quick Hi. Been vaping for almost 6 months now and took to it like polypropylene glycol to silica. into rebuildables and mechanicals and have been since week 3. current set up is a paps 2.5 with SNP and and diver with some GVC been spending a lot of my time over several forums since some changes in one in the UK. So thought I would dip my toe in here. hoping to get to know some more like minded vapers Euan
|
|