Chinese Oddy Clone

[Deleted]

try it without the o ring, its worth a try!

[Mev]

that o-ring is designed to seal the bottom, that shouldn't stop airflow totally though. I have put an extra o-ring on myself to seal better on the Naughty.

[blakey]

Any chance you can get some pics on here so we can try to see what's happening?

[Deleted]

pics would be ideal as we are all guessing blindly really

[neofolis]

Thanks for your efforts everyone, I'll try to get some pics sorted, probably not until tomorrow though.

[bones3]

i have cracked the gurgling lark once and for all!!

i saw i wick and coil set up photo for the oddy posted on a nother site some where and i one that had wick tails going down inside the ceramic
i built a wick and coil this time with 1- 2mm + 1 1mm long for across and down the channels and an extra 2mm short for across the top with the ends ran down the inside of the ceramic these dont need to be very long 7mm max

not had a single gurgle all day i have even left the juice contorl open when i am not vaping!!

at long last!!

[Greigster]

Sounds like a good idea. Was getting gurgling, but stopped at the mo. Will try this if I get it again.

[Mev]

sounds like a plan bones.

[baconandeggs]

Feb 8, 2013 14:56:25 GMT bones3 said:

i have cracked the gurgling lark once and for all!!

i saw i wick and coil set up photo for the oddy posted on a nother site some where and i one that had wick tails going down inside the ceramic
i built a wick and coil this time with 1- 2mm + 1 1mm long for across and down the channels and an extra 2mm short for across the top with the ends ran down the inside of the ceramic these dont need to be very long 7mm max

not had a single gurgle all day i have even left the juice contorl open when i am not vaping!!

at long last!!

Nice one, With the juice control though I don't leave mine open. Always closed as it will seep through so make sure you close it.
It will become second nature, go to use it and turn both wrists in one swoop and close it when your done to be on the safe side.

[Chefs Flavours Lew]

Shamelessly copied from vapor freak...


The Nautilus Long Mode in a new version V2. Not polished stainless steel, suitable for use with new ceramic part, ceramic and Centerpin for easy winding and up to 3mm and silicate wick. Smooth transitions. All working parts with fine thread and perfect fit. A special ceramic was prepared by a high-quality ceramic manufacturer.

www.vapor-freak.de/Neu-im-Sortiment/Nautilus-V2-Long-Mode

What difference would a ceramic and centre pin make?

[Perpetua]

Maybe they've done as Imeo did with the Odysseus V2 Lew  . . . the ceramic is different, it makes trapping/positioning the second wire easier.

Off for a look to see if there are any pictures . . . . .


Edit to say, no pictures then. But if it takes 3mm wick as opposed to 2mm on the V1, then it sounds like an Odysseus V2.

[Greigster]

The picture of the ceramic holder defo looks like the V2 oddy/Penelope ceramic holder with the metal channel for the negative wire.

[Chefs Flavours Lew]

Just looked at the photo again and in the main pic I can see the ceramic is different. It just sits in the middle of the holder without running down the sides. I'll just have to get one I suppose.. *shopping*

[Deleted]

it looks like a v2 ody so only one channel and the opposite side is metal for trapping the neg wire under the wick

[Deleted]