Kayfun 2.1ES

[blakey]

Feb 6, 2013 1:20:02 GMT steve386 said:

Feb 6, 2013 0:05:58 GMT blakey said:

Found that it took quite a while to bed in properly in the ody Steve ???
Instant in the kayfun and the drippers though - go figure

Missed out on the first run of the v3's. Did you manage to get one?

What kind of a soppy assed question is that ???
lol

.

[blakey]

I did this guide to help someone and I sent it to a couple of other people to help them out and it was suggested that I post it here for anyone else it may help.
This is seriously the best silica wicked attie that I have ever used



right- .2 ni-chrome at about 6-6.5cm



Fold it and wrap the coil like this, note that I bent the connecting ends round to make fitting easier. That's 1.5mm silica wick



fit the bugga



Make sure that the coil is clear of anything it can short on and above the airhole



Fold it upwards and thread through the tube and screw it down



You end up with this



Trim it so that you end up with this



Then poke the wick ends down to the base in a clockwise direction, it should cover all of the base like this. No need to force it down the sides of the main plinth, it just needs to rest on the base, It will pick up any juice rising up the channels. Chance here to tidy the coils



Get some juice on it and that'll make it easier to keep it all down



Assemble and fill

[Bluefish]

These things are so easy to wick and coil, perfect for learners, and without doubt the best vape i've had yet, fun fun fun, kay.

[VE Jason]

Feb 6, 2013 11:04:12 GMT blakey said:

I did this guide to help someone

Only so that I could check it and approve it though ???

[blakey]

Feb 6, 2013 15:11:45 GMT VE Jason said:

Feb 6, 2013 11:04:12 GMT blakey said:

I did this guide to help someone

Only so that I could check it and approve it though ???

lol
I mentioned no names

[ian]

I've put around 15ml through mine now and with each fill the flavour is getting more intense,can't see me ever changing the coil if it wants to stay like this :)It vapes identically like the I-atty IMO which is a bonus.It really is child's play and enjoyable to setup and i found Blakeys how to guide works a treat and it is well thought out and easy to follow.Ive had to put my mod down for half hour as i'm most definately blown away with a nic overdose,only vaping 26mg aswell :oNo way can you chain vape this thing,the sheer amount of vapour blows your senses away and your socks off aswell.I'm starting to save for the newer version now,no doubt another new version will be available by the time i have enough pennies saved

[blakey]

That is the latest version of the mini mate, the next on your shopping list is the 4.5ml kayfun 3.1
22mm wide so it'll fit the form factor of the vamo

[Skwoddy]

watched todds 3.1 vid, deffo sold on it, just waiting for stock : /

[Greigster]

Feb 6, 2013 15:24:48 GMT Skwoddy said:

watched todds 3.1 vid, deffo sold on it, just waiting for stock : /

+1

[blakey]

Feb 6, 2013 15:24:48 GMT Skwoddy said:

watched todds 3.1 vid, deffo sold on it, just waiting for stock : /

intaste are reportedly getting them on Friday mate

[steve386]

Other than the size difference, are there any other changes between the v2.1 mini and the v3?

[blakey]

Feb 6, 2013 16:49:26 GMT steve386 said:

Other than the size difference, are there any other changes between the v2.1 mini and the v3?

Form factor is the only difference apart from the the adjustable center post of the V3.1 Steve.

[Skwoddy]

Feb 6, 2013 17:00:00 GMT blakey said:

Feb 6, 2013 16:49:26 GMT steve386 said:

Other than the size difference, are there any other changes between the v2.1 mini and the v3?

Form factor is the only difference apart from the the adjustable center post of the V3.1 Steve.

And the factory Drip tip or custom combo, and of course the finishes, think ill have the ceramic to get away from the norm.

[Bluefish]

anybody using there's with all 3 sections on? i'm not no real need.

[ian]

I'm not,don't see the need either.I love the fact that you don't even have to take it off your mod to fill :)And after you fill you get no leakage,gurgling or any of the other daft stuff that happens with most atomisers.Great design and a step forward in vaping IMO.I did put all the sections on to see what it looked like but it just looked like a magic wand