GG to Kayfun conversion kit preview by Todd

[steve386]

Jun 17, 2013 3:56:18 GMT ibalders said:

Jun 16, 2013 19:48:40 GMT gaz0012 said:

Name added to list just one thing is there different kits as reason behind stating v2 or v1 etc.as thought the bases and tanks were all the same.

If you just ask for the full kit (works out at just over £40 including delivery) then it will fit both the V1 and V2 Nautilus, plus the odysseus and terminator.

I've ordered 1x full kit (Terminator-C), 1 x O-ring and screw/isolator kit - ship to UK

Will that work on all versions + the longer Terminator C?
I notice a lot of people have also ordered the 1x O-ring and screw/isolator as well. Is that not included in the full kit?

[maccafan]

If I understand it correctly, it will only work with the longer version of Terminator/Nautilus ie., Termintor-C/Nautlius long mode which is small(basic) + atleast one 23mm tank.). It should also work with the Rampage mods medium and long mode.

The O ring + screw/isolator is included with the kit and people are ordering a spare.

I am sure he also said it will work with the Tobeco Nauti. Looks like a brilliant piece of kit with the Terminator's ease of fill + flow control combined with the smooth vape + flavour intensity of the Kayfun.

[steve386]

Jun 17, 2013 5:42:27 GMT maccafan said:

If I understand it correctly, it will only work with the longer version of Terminator/Nautilus ie., Termintor-C/Nautlius long mode which is small(basic) + atleast one 23mm tank.). It should also work with the Rampage mods medium and long mode.

The O ring + screw/isolator is included with the kit and people are ordering a spare.

I am sure he also said it will work with the Tobeco Nauti. Looks like a brilliant piece of kit with the Terminator's ease of fill + flow control combined with the smooth vape + flavour intensity of the Kayfun.

Thanks Macca, it does look like a great bit of kit.

[ibalders]

And it's so easy to wick, no longer do you need to use resistant and non-resistant wire's together, and Todd forgot to mentioned that this also has an adjustable air control as well. To be honest I amazed with the build quality of the unit, some class engineering work has gone on here.

[jonn]

Thank you gents!

I thought this could be a keeper, plus it works out cheaper than buying the original Kayfun. Basically we don't even need an expensive outer shell, as the inner kit is primarily the maker of vapour. The bonus is that it fits almost anything of Ody class.
I haven't got a Nauti or Terminator myself, but I've seen quite a few on sale in various classies...

[maccafan]

Got my payment PM today. Expected to ship some time this week.

So anyone else on the list, please check your PM on the forum.

[blakey]

Jul 14, 2013 18:43:23 GMT maccafan said:

Got my payment PM today. Expected to ship some time this week.

So anyone else on the list, please check your PM on the forum.

Nice one macca, I hope to have a couple of these soon too

[maccafan]

I was wondering when Steve was upping the numbers..

[archiecat]

Now we have the Kayfun lite, that has devalued my Kayfuns, thanks for that Svoemesto, is this kit good value?

[blakey]

Jul 14, 2013 19:41:44 GMT maccafan said:

I was wondering when Steve was upping the numbers..

He's a lovely man that steve

[maccafan]

Total landed cost of the full kit is around £37.00. For this you get the ease of fill and flow control of a terminator combined with the ease of coil build and flavour of a Kayfun.

I have a original terminator for which I bought a extra tank but do not have the long mouthpiece. I was using a cut off CE2 tube to extend it but prefer the stainless steel mouthpiece of my other terminator C. So I had to buy a long mouthpiece anyway at around £15.00 so it's good value for me.

If you have a Tobeco Nauti, the Chinese clone, this is really good value.

[gaz0012]

Jul 14, 2013 18:43:23 GMT maccafan said:

Got my payment PM today. Expected to ship some time this week.

So anyone else on the list, please check your PM on the forum.

What number was you on the list just so i know how long i will have to wait.

[maccafan]

Jul 16, 2013 9:55:31 GMT gaz0012 said:

Jul 14, 2013 18:43:23 GMT maccafan said:

Got my payment PM today. Expected to ship some time this week.

So anyone else on the list, please check your PM on the forum.

What number was you on the list just so i know how long i will have to wait.

159.

[gaz0012]

Im 178 but not had a pm yet hopefully get one soon.

[homme]

I wanna buy this parts... ;(
How to buy this parts?