O rings for GGTS

[deesigner]

After deciding that I wasn't going to pay £5.99 with postage for a set of O rings for my GGTS I found this pack on eBay, should keep me going for a few years

cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140407834949&ssPageName=ADME:L:OC:GB:1123#ht_5057wt_905

£2.99 including postage. These O rings fit my old GGTS perfectly

[Lee]

Bookmarked. I've had mine to bits today to reseat the o rings in the centre pin. They keep popping up into the atty connection. I think I've solved it with a bit of vaseline now.

[deesigner]

It was those tiny ones I needed, I had one missing altogether. I was a bit worried these may not fit, but they're perfect and there's around 30 sets in there LOL.

Don't know if they're the same O rings on the newer versions but there's a good selection in the set.

[Lee]

Worth getting as the o rings are the only pieces on a GG that will need renewing. At the moment when I strip my GG down to clean and lubricate, (often just for fun - I'm like that) I have to have my work area spotless so none of my o rings can dissappear. Having some spares would give a little more peace of mind.

[shamreez]

thanks a lot dee...

this is something even i have to book mark

[deesigner]

There're quite a few different lots available if you just search 'O rings' , might even be able to get them cheaper. Just I wanted them right now LOL.

[shamreez]

Jun 16, 2011 14:37:22 GMT deesigner said:

There're quite a few different lots available if you just search 'O rings' , might even be able to get them cheaper. Just I wanted them right now LOL.

I just drove to the nearest B&Q and got a set for £1 when I lost my tiny o-ring. It is very very easy to lose those if it falls out.
But this is something I would be buying so that I get a nice backup

[deesigner]

There're 28 of the tiny ones so enough to keep most people going for a good while

[Perpetua]

Oooooo, bargain Dee!!!

I'm going to buy some now, you can never have too many 'o' rings.

Thank you.

[jimmyjack]

if anyone is looking for certain sized o-rings try this place got a good selection hope this helps

simplybearings.co.uk/shop/index.php?cPath=19_4501_4705

[steve386]

Jun 16, 2011 13:49:37 GMT deesigner said:

After deciding that I wasn't going to pay £5.99 with postage for a set of O rings for my GGTS I found this pack on eBay, should keep me going for a few years

cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140407834949&ssPageName=ADME:L:OC:GB:1123#ht_5057wt_905

£2.99 including postage. These O rings fit my old GGTS perfectly

It says the listing has been removed when I click on it. Looks like I missed this one.

Anyone know what sizes are needed for the ggts?

[hifistud]

www.polymax.co.uk/acatalog/Rubber_O-ring_Kits.html is also worth a look...

[camperman]

just as a matter of caution your only supposed to use food/chemical grade O rings on your GG, i-atty, UFS ect especially the ones that go inside an i-atty/ufs/avs as they come into contact with e-liquid and the last thing we want is some sort of chemical reaction with the rubber.

heres a list of sizes that i give credit to imeo for making on the ecf forum

Iatty

14/1,5 base of the connector
2x3/1,8 around ceramic
4/2 under mouthpiece

GGTS

2/1 (2) inside connector
17/1,5 between connector and CT
21/1,5 inside CR
14/1 outside of the lids
9/1,5 inside 901-510 lid
11/1,5 inside 801 lid


UFS

9/1,5 (2) connector
17/1,5 (2) between connector and CT
2/1 (2) inside connector
21/1,5 CR
17/1,5 upper sleeve
16/1,5 lower sleeve
5/1,5 extension 510
9/2 under mouthpiece
14/1,5 base of UFS
4/1,5 under the pin


new UFS

9/1,5 (2) connector
17/1,5 (2) between connector and CT
2/1 (2) inside connector
21/1,5 CR
17/1,5 upper sleeve
16/1,5 lower sleeve
5/1,5 extension 510
9/2 under mouthpiece
14/1,5 base of UFS
4/1,5 under the pin
17/1 between upper sleeve and refilling cap



AVS

8/2 base of 901 atomizer inside AVS
9/2,5 between 2 caps of the AVS tank
17/1,5 (2) big refill cap and between collector tank and connector of GGTS
14/1 outside of the lids
21/1,5 inside CR
2/1 (2) inside connector
9/1,5 901 lid
11/1,5 801 lid
5/1,5 510 atomizer extension


AFS

8/3 base of 901 atomizer inside AFS
15/2,5 base of the tank where it meets the CR
19/1,5 inside CR
9/3 between 2 caps of the AFS tank
16/1,5 big refill cap
12/1,5 base of the connector