Volts, Ohms, problem solved.

[raid2506]

Aug 21, 2013 16:47:40 GMT Balllsy said:

I don't understand all this testing malarky Matt, but would it tell me what voltage is passing through a kick/kick 2 (which is vw) I would assume it would need to be above the carto/atomiser coil to do that ? as the voltage is dependant on the coil resistance.

Sorry if the question sounds stupid (I suspect it probably does )

There are no stupid questions mate, only stupid answers

I will test it and get back to you but I'm pretty sure it's a yes, logically it should give the output voltage under load with a kick the same as it does without one.

[raid2506]

Right then, for everybody who has shown an interest.

I have priced up the supplies required (and something for my time and effort) and it will be £12 (inc P+P 1st class and Paypal fees) per set.

The set comprises one multimeter and one modified test lead set with dual 510 test connectors (the multi meter will be marked at the correct settings for those who are unfamiliar with it's use).

I will put a thread in 'The Mod Shop' and kindly request that a list is started.

For those wishing to buy I will start production this weekend and the first units should be sent out on Monday.

[testdruif]

Aug 21, 2013 17:37:22 GMT raid2506 said:

Right then, for everybody who has shown an interest.

I have priced up the supplies required (and something for my time and effort) and it will be £12 (inc P+P 1st class and Paypal fees) per set.

The set comprises one multimeter and one modified test lead set with dual 510 test connectors (the multi meter will be marked at the correct settings for those who are unfamiliar with it's use).

I will put a thread in 'The Mod Shop' and kindly request that a list is started.

For those wishing to buy I will start production this weekend and the first units should be sent out on Monday.

Hey Raid,

You mention 12 pounds for a multimeter & the 510 connector + cabling (Fancy yellow with green stripes gizmo with the red and back wire) is that correct ?

I kinda already have a fancy multimeter so should only require the 510 connector + cabling (Fancy yellow with green stripes gizmo with the red and back wire) you showed in the pictures.

[raid2506]

I will need to see if I can get some decent test leads individually. If so I should be able to offer that as a separate mod listing.

[Mev]

I could point you to some really good plugs raid2506 , just need a roll of cable then. Can get rolls of test lead cable quite cheap, i use it for my zappers.

[raid2506]

PM sent Mev

[harare2482]

Please could you send me one of these testing rigs I will pay by PayPal or whatever way you prefer

[chrisjw]

I think you showed me a prototype at Vapefest didn't you Matt?...........great idea.........I have the same meter as well............

[raid2506]

harare2482 PM sent yesterday

[raid2506]

That's right chrisjw, it got a good workout at the Prestleigh meet too!

I am trialing an upgraded meter at the moment and it's looking good, back light, reading hold and a nicer look.