Coil rebuild

[Carpe Vapor]

I sat in my car t'other day with my Paps X and homemade spearmint - filled the car with vapour lol.

Opened the door and 4 people ran over thinking my car was on fire

[VapeKingMikes]

Feb 4, 2014 12:44:51 GMT Carpe Vapor said:

cotton wool is better than both in my opinion (cheaper too)

ok im gonna buy what i need then give it a go

[VapeKingMikes]

Feb 4, 2014 12:46:46 GMT Carpe Vapor said:

I sat in my car t'other day with my Paps X and homemade spearmint - filled the car with vapour lol.

Opened the door and 4 people ran over thinking my car was on fire

. Loooooool I can picture that. You must of been rolling over with laughter

[Steve (VapeStorm)]

Normal replacement heads mate its either 2 or 2.1 ohm

[VapeKingMikes]

Ok ive been using 2.5s i guess that adds to it as well

[Steve (VapeStorm)]

That will definatly factor into it, get some lower resistance coils and youll be blowing clouds in no time

[DiscoDes]

VapeKingMikes

A good idea for you would be to get along to a vapemeet, there's one held in London regularly and I think there's one this month. Take along your recoiling stuff and I'm sure that someone will walk you through it. Much better than reading or watching videos, you'll be a master recoiler in no time!

[VapeKingMikes]

Feb 4, 2014 12:55:05 GMT DiscoDes said:

VapeKingMikes

A good idea for you would be to get along to a vapemeet, there's one held in London regularly and I think there's one this month. Take along your recoiling stuff and I'm sure that someone will walk you through it. Much better than reading or watching videos, you'll be a master recoiler in no time!

that sounds like a good idea, so is it like jus vapers meeting to help each other out etc

[DiscoDes]

fisher

Have a look at this : allaboute-cigarettes.proboards.com/post/238404/thread

Principle is the same for protanks. When you cut off the wicks place one over the coil to make a "flavour wick" for Protanks & Evod heads.

I now use premade wicks from Fasttech and it takes me 5 minuts to do a head, I do mass batches of them periodically.

[DiscoDes]

Feb 4, 2014 13:01:16 GMT VapeKingMikes said:

Feb 4, 2014 12:55:05 GMT DiscoDes said:

VapeKingMikes

A good idea for you would be to get along to a vapemeet, there's one held in London regularly and I think there's one this month. Take along your recoiling stuff and I'm sure that someone will walk you through it. Much better than reading or watching videos, you'll be a master recoiler in no time!

that sounds like a good idea, so is it like jus vapers meeting to help each other out etc

VapeKingMikes

Exactly

There may be large amounts of drinking done at the same time though!

People take along their e-cigs and will let you try, often a vendor will come along and donate juices for a prize and to try also people take gear along to swap/sell they're a great laugh, just look at the Vapemeet board for information.

[VapeKingMikes]

Feb 4, 2014 13:01:59 GMT DiscoDes said:

fisher

Have a look at this : allaboute-cigarettes.proboards.com/post/238404/thread

Principle is the same for protanks. When you cut off the wicks place one over the coil to make a "flavour wick" for Protanks & Evod heads.

I now use premade wicks from Fasttech and it takes me 5 minuts to do a head, I do mass batches of them periodically.

if i made a coil using cotton wool do i place another bit on top of the coil ive made as well? Or jus use the coil ive made... Im gonna make a coil for mini pro tank

[VapeKingMikes]

Feb 4, 2014 13:03:16 GMT DiscoDes said:

Feb 4, 2014 13:01:16 GMT VapeKingMikes said:

that sounds like a good idea, so is it like jus vapers meeting to help each other out etc

VapeKingMikes

Exactly

There may be large amounts of drinking done at the same time though!

thats fine i like a drink... Im alot younger than most of you on here so might not fit in lol im obviously over 18 tho im 24

[DiscoDes]

Feb 4, 2014 13:06:23 GMT VapeKingMikes said:

Feb 4, 2014 13:01:59 GMT DiscoDes said:

fisher

Have a look at this : allaboute-cigarettes.proboards.com/post/238404/thread

Principle is the same for protanks. When you cut off the wicks place one over the coil to make a "flavour wick" for Protanks & Evod heads.

I now use premade wicks from Fasttech and it takes me 5 minuts to do a head, I do mass batches of them periodically.

if i made a coil using cotton wool do i place another bit on top of the coil ive made as well? Or jus use the coil ive made... Im gonna make a coil for mini pro tank

You don't need a extra wick for cotton wool just ensure that you use enough so there's no gaps in the groove where the coil sits or it will flood, nice and fluffy at the ends is the way to go!

[fred]

Aga-t2, 1.1ohm micro coil, cotton wick, sentinel clone (18650 @ 3.7v), 70/30 (PG/VG) homebrew juice!





Like I said before, take a photo of your vape - you'll be surprised at how dense it looks!

[VapeKingMikes]

Feb 4, 2014 13:13:47 GMT fred said:

Aga-t2, 1.1ohm micro coil, cotton wick, sentinel clone (18650 @ 3.7v), 70/30 (PG/VG) homebrew juice!





Like I said before, take a photo of your vape - you'll be surprised at how dense it looks!

ok when Ive got a second ill take a pic and upload it