Kayfun ?

[Deleted]

Got the EH PRO kayfun lite plus wih air control on sole of the base, it gets used all day everyday and as has been stated, for some reason its very forgiving in the set up. Paid £34:99 from the vapetank. Would highly recommend you consider this model too.

[decoy]

em errr eee sorry to side track but ive just duel micro coiled my kfl clone this wont do it any harm will it ,running at 1.2 ohm

[Deleted]

Apr 28, 2014 18:48:58 GMT decoy said:

em errr eee sorry to side track but ive just duel micro coiled my kfl clone this wont do it any harm will it ,running at 1.2 ohm

No you won't harm the kayfun. 1.2 ohm is not very low. the danger is to your batts, if your using a mech, and go too low for the battery.

[Chris]

What Steve (VapeStorm) said - the hcigar clone works like a charm.

B-e-a-utiful vape.

[Deleted]

Most of the ones ( clones) from UK vendors are a much of a muchness, ie they all work.

just find one with the airhole screw on the side ( purely for ease of adjustment) and you won't go wrong.

I have side, bottom, real kayfun , real Russian and they all perform well.

Performance ultimately depends on coil and wick setup.

[intheblim]

Apr 29, 2014 20:58:33 GMT @purple1234 said:

Most of the ones ( clones) from UK vendors are a much of a muchness, ie they all work.

just find one with the airhole screw on the side ( purely for ease of adjustment) and you won't go wrong.

I have side, bottom, real kayfun , real Russian and they all perform well.

Performance ultimately depends on coil and wick setup.

how many raps do you do on your coils ?

[Deleted]

Apr 30, 2014 16:38:53 GMT intheblim said:

Apr 29, 2014 20:58:33 GMT @purple1234 said:

Most of the ones ( clones) from UK vendors are a much of a muchness, ie they all work.

just find one with the airhole screw on the side ( purely for ease of adjustment) and you won't go wrong.

I have side, bottom, real kayfun , real Russian and they all perform well.

Performance ultimately depends on coil and wick setup.

how many raps do you do on your coils ?

Hi dude I use 28awg kanthal and use around 6 -7 wraps , gives from 1.2- 1.4,ohms .

[intheblim]

Apr 30, 2014 17:07:11 GMT @purple1234 said:

Apr 30, 2014 16:38:53 GMT intheblim said:

how many raps do you do on your coils ?

Hi dude I use 28awg kanthal and use around 6 -7 wraps , gives from 1.2- 1.4,ohms .

I have just made a coil for the kayfun at 4 wraps and its coming out at 1.2ohm is this ok ?

[Deleted]

intheblim , you know what ? Wraps , coils , they're all slightly different, we use different gauge wires, different spacing, different diameter tools to wrap them on, so yeh as long as it not shorting ( which it isn't) and it glows nice and evenly when fired up then do this.

Put a wick in it, screw the first bit of the chimney on, tuck wicks down , drip juice onto them ( get them juicy and wet), fire it up and see if its producing good vapor and sizzling nicely ,then screw on the pointy but of the chimney and have a vape.

Does it taste good? If so screw tank and fill her up with juice ( full or half your choice).

Does it taste harsh burnt ? The. Just take chimney and wick off, and make a new coil but add extra wrap.

It's just simple trial and error, and it's dead easy .

Enjoy

[intheblim]

Apr 30, 2014 20:14:00 GMT @purple1234 said:

intheblim , you know what ? Wraps , coils , they're all slightly different, we use different gauge wires, different spacing, different diameter tools to wrap them on, so yeh as long as it not shorting ( which it isn't) and it glows nice and evenly when fired up then do this.

Put a wick in it, screw the first bit of the chimney on, tuck wicks down , drip juice onto them ( get them juicy and wet), fire it up and see if its producing good vapor and sizzling nicely ,then screw on the pointy but of the chimney and have a vape.

Does it taste good? If so screw tank and fill her up with juice ( full or half your choice).

Does it taste harsh burnt ? The. Just take chimney and wick off, and make a new coil but add extra wrap.

It's just simple trial and error, and it's dead easy .

Enjoy

Thanks for the help - im also burning it at 8.5 p - is this ok ?

[Deleted]

8.5 watts , are you using a variable volt/ watt device? ( regulated mod) if so then as long as it tastes good to you go for it.

Besides with regulated mods and their built in protective circuits you will be fine try even higher to to see how it tastes.

I use mech mods so am at the mercy of my battery power.

[intheblim]

Apr 30, 2014 20:34:15 GMT @purple1234 said:

8.5 watts , are you using a variable volt/ watt device? ( regulated mod) if so then as long as it tastes good to you go for it.

Besides with regulated mods and their built in protective circuits you will be fine try even higher to to see how it tastes.

I use mech mods so am at the mercy of my battery power.

Its all new to me at the moment as im still learning but i am using a itaste svd but as you said it will all come good after a bit of practise im just glad i have helpful people like yourself and this forum to help - thankyou again