Kayfun/Russian Micro Coil turorial.

[decoy]

tiss wondering would a zimmer/walking frame mod sell well fiddles

[VapingBad]

May 17, 2014 14:15:20 GMT ronaldo said:

lots of dodgy purple efests about

Is it just me or does ronaldo look like Super Mario without the hate in his profile pic

[fiddles]

May 17, 2014 14:33:08 GMT teethcv said:

May 17, 2014 14:25:07 GMT fiddles said:

I know the colour purple well, it's the colour cheeky young whipper snappers go when I am throttling them

vapefest not long now mate you got permission to come out you old peoples home for the weekend yet?

No my ankle bracelet would start peeping if I went that far

May 17, 2014 14:43:46 GMT decoy said:

tiss wondering would a zimmer/walking frame mod sell well fiddles

screw that mobility scooter with built in mod , that's the trouble with todays youth no imagination Tease-smiley

May 17, 2014 14:47:22 GMT VapingBad said:

May 17, 2014 14:15:20 GMT ronaldo said:

lots of dodgy purple efests about

Is it just me or does ronaldo look like Super Mario without the hate in his profile pic

No not just you look HERE

[tominmids]

Superb video tutorial Roscopecotrain Very easy to follow and at a nice pace with excellent views.
Will be using this for my Kayfun lite and Russian 91% clones.

Thanks very much. It is much appreciated, and bookmarked.

[Roscopecotrain]

May 20, 2014 9:41:00 GMT tominmids said:

Superb video tutorial Roscopecotrain Very easy to follow and at a nice pace with excellent views.
Will be using this for my Kayfun lite and Russian 91% clones.

Thanks very much. It is much appreciated, and bookmarked.

Thank you. Hope it helps you out with your builds.

[Deleted]

Thanks Roscopecotrain you inspired me to get a kayfun clone

I just got it (via @hubcap - thanks again)...within 15 minutes I was up and vaping....

Very good, easy to follow tutorial

Taifun users take

Jane

[archiecat]

Good vid Roscopecotrain enjoyed it!

Do you think you get better flavour/taste from a micro coil and cotton over normal coil and Silica?

Also you say 3.2 Kanthal should it not be thinner than that?

Sorry for all the questions, just want to be sure before I order stuff.

John

[Deleted]

Roscopecotrain ya in demand again with/without kitties

[chykensa]

archiecat - when I first got my Russian, I put an ordinary coil wound on silica to get it up and running. The difference between that and a microcoil and cotton wool is marked, believe me!
As for .32 Kanthal, that's what I use, 6 wraps around an M2 bolt gives me 1.2ohm, and a cracking vape. The bolt is a little larger in diameter too, and that helps an old git like me to get the cotton wool through too

[Deleted]

Does anyone know if there's a kayfun clone that is no bigger than 19mm diameter to fit my vtr?

[chykensa]

@johanino - there used to be a Kayfun mini I believe, although I don't know if it's been cloned and have a feeling it's not made any more - can someone help here please? I'm also not sure of its dimensions either . . .

ETA: a quick search shows that it's discontinued at Cloud9Vaping, and Fasttech don't do a clone. Alilbaba have one on their site, but you need to order a minimum of 20!!
There does appear to be a clone available state-side www.angelcigs.com/kayfun-mini-v2-1-rebuildable-atomizer-clone-by-ivogo.html, but not on these shores, unless someone know differently!

[Roscopecotrain]

May 28, 2014 20:48:24 GMT archiecat said:

Good vid Roscopecotrain enjoyed it!

Do you think you get better flavour/taste from a micro coil and cotton over normal coil and Silica?

Also you say 3.2 Kanthal should it not be thinner than that?

Sorry for all the questions, just want to be sure before I order stuff.



John

Hi John.

I prefer cotton wick as it gives me better flavour but all down to the induvidual. Give both a try and see how you get on.

0.32 kanthal is what i use for all my micro coils and then i use 0.2 for normal coils.

I have used 0.42 kanthal in my drippers but that is tough to work with.

Hope this helps.

Just to add, i use a 2mm wide screwdriver to wrap my coil round. If you want a longer micro coil but the same ohms then use a thinner screwdriver/drill bit so you can wrap more coils for the same ohms.

[archiecat]

Thanks for the reply. I'll order some .32 Kanthal today and give it a go.

[djs]

Roscopecotrain

I have been messing (too much) with Kayfuns and have decided larger diameter coils are the way to go.

The amount of cotton wool at the ends of the wick is important to get good wicking. The thinner the coil, the thinner the cotton wool.

Too thin or short in those wells (that you get once you screw the chimney on) and it's dry hit city...and then burning too.

[Die5el]

You make it look so easy great tutorial