Mini Protank 2 Silicone O-Rings

[cHooBeyDoo]

I'm looking for both types of the silicone seal o-rings that fit the Mini Protank 2 as I noticed today that the o-rings on one of my Mini Protank 2s have started to wear away and are slowly disintegrating (which I think is caused by some damn strong yummy custard thats sitting in it at the moment! )

Kangertech (USA) have the seals that fit between the glass (arrow marked B in pic) and sell them as a quantity of 100 but will cost roughly £20 total to get here. There are a few sellers on Ebay that are selling them too, 10 for £3 upwards, so as a last resort will buy from there.

The seal that fits onto the coil base (arrow marked A in pic) looks like the one that will break first but I cannot for the life of me find it anywhere.



I've only noticed it on the bottom seals as i've not been able to look at the top one yet which is why I am blaming it on the boogie this strong custard juice at the moment, although it's only about 7-8 weeks, it could be due to over-tightening as this was my first ever decent clearo.

Would anyone know per-chance where I could buy them please, especially the coil base seal, without having to resort to buying a new tank?

[Super-Shiny]

cHooBeyDoo you can get the base here if you want a whole new one: www.ukecigcabin.com/product/mini-base

Or this: www.ukecigcabin.com/product/o-ring

[cHooBeyDoo]

Thanks Super-Shiny , I bookmarked the links just in case and also learnt something new........
TOP TIP - The Mini Protank 2 base can be used on the Protank 2 as a base too so it fits ego connectors
Which in turn means that a Protank 2 base o-ring will fit on the Mini Protank 2 base as they are the same size and same thread

[jackcustard]

May 29, 2014 7:03:17 GMT cHooBeyDoo said:

Thanks Super-Shiny , I bookmarked the links just in case and also learnt something new........
TOP TIP - The Mini Protank 2 base can be used on the Protank 2 as a base too so it fits ego connectors
Which in turn means that a Protank 2 base o-ring will fit on the Mini Protank 2 base as they are the same size and same thread

Explain please, im confused...

[cHooBeyDoo]

May 29, 2014 8:08:43 GMT jackcustard said:

Explain please, im confused...

The thread on the Mini Protank 2 base (marked A in first pic) is the same as the thread on a Protank 2 base (the part the coil sits in).
So you can replace the Protank 2 base (510 connector) with the Mini Protank 2 base (ego connector) so it fits an ego battery thread.

So it looks like this:

[jackcustard]

I wonder if my evod dual coil base would fit in my pt2.... hmmm

Nice find

[cHooBeyDoo]

Wouldn't hurt to try jackcustard

[jackcustard]

May 29, 2014 15:05:38 GMT cHooBeyDoo said:

Wouldn't hurt to try jackcustard

It doesnt with the coil head on

[cHooBeyDoo]

May 29, 2014 15:20:33 GMT jackcustard said:

May 29, 2014 15:05:38 GMT cHooBeyDoo said:

Wouldn't hurt to try jackcustard

It doesnt with the coil head on

Oh well, at least you know it doesn't work.
Mini Protank 2 base with the coil fits the Protank 2 though