HANAA on focal 30W £33 18650, in stock, new pics :) received

[ronaldo]

great they shouldn't all start packing up then in a few months and I have a few of the ball bearing tactile switches in my tool kit as that's what I use in the submarines for launching torpedo's haven't done one of them for a while though

[boyofford]

Jul 15, 2014 14:04:40 GMT robby said:

Made some VG red Astair up, not steeped but it tastes so good at 20Watts

VG RA you say? forecast cloudy?!

[dalealan]

Jul 15, 2014 13:50:09 GMT robby said:

"Power Locked mode: Hold down both the up and down buttons for two seconds will place the device in Power Locked mode. In this mode, the mod will operate normally, but you will not be able to change the power setting. This mode prevents accidental power level changes due to the buttons being pressed while in a pocket. To exit Power Locked mode, hold the up and down buttons for two seconds. Note: I was not able to get this working."

Works 100% for me

This is one of the functions I'd like to have working so it's great that it does robby. Right I'll give it anohter 2 hours for them to get the silver version in or I'm ordering the black 'un

[robby]

:) Foclecig

[dalealan]

Right they've got 1 hour 51 minutes left to get a silver one in Black or grey robby if you had the choice again?

[VapingBad]

Jul 15, 2014 14:41:40 GMT robby said:

[robby]

Jul 15, 2014 14:45:49 GMT dalealan said:

Right they've got 1 hour 51 minutes left to get a silver one in Black or grey robby if you had the choice again?

Personally I prefer Black, grey looks like they have put the undercoat on and forgot about the top coat

[boyofford]

Jul 15, 2014 14:41:40 GMT robby said:

:) Foclecig

..... jealous... sat here vaping on a nemesis/origen dripper at 0.5ohms.... just not cutting it when I'm reading both your threads!

[VapingBad]

But the silver won't show the scratches so much, decisions, decisions, decisions, this vaping lark is harder than people think.

[dalealan]

Jul 15, 2014 14:46:58 GMT robby said:

Jul 15, 2014 14:45:49 GMT dalealan said:

Right they've got 1 hour 51 minutes left to get a silver one in Black or grey robby if you had the choice again?

Personally I prefer Black, grey looks like they have put the undercoat on and forgot about the top coat

Funnily enough I thought it looked like primer. Black it is then. Do you charge using the usb socket robby or do you take the batteries out and use an external charger. Not too sure the screws would put up with that much punishment.

[robby]

Jul 15, 2014 14:50:50 GMT dalealan said:

Jul 15, 2014 14:46:58 GMT robby said:

Personally I prefer Black, grey looks like they have put the undercoat on and forgot about the top coat

Funnily enough I thought it looked like primer. Black it is then. Do you charge using the usb socket robby or do you take the batteries out and use an external charger. Not too sure the screws would put up with that much punishment.

That`s my thinking as well, it`ll be on the USB while I am at the computer and see how it goes. Going to look into magnets which would have to be glued to the case and cover being aluminium

[dalealan]

Jul 15, 2014 14:53:51 GMT robby said:

Jul 15, 2014 14:50:50 GMT dalealan said:

Funnily enough I thought it looked like primer. Black it is then. Do you charge using the usb socket robby or do you take the batteries out and use an external charger. Not too sure the screws would put up with that much punishment.

That`s my thinking as well, it`ll be on the USB while I am at the computer and see how it goes. Going to look into magnets which would have to be glued to the case and cover being aluminium

Yeah thats my thinking too. Dont want to put any undue stresses on the screws or the usb charging port so it's a catch 22 situation

[robby]

A review here, I am convinced now that this is the KSD one that I have.

www.kickcigsnow.com/mods/box-style/review-ksd-box-modz/

[dalealan]

This seems the wrong way round robby

•displays voltage being used (input voltage from 3.2 volts to 4.3 volts)

•On-Board USB Charging @ 500mAh (from 5 volts to 6.5 volts)

Ignore that ive just read it again and it sort of makes sense. Bit weird charging at 6.5 volts mind but oh well. Got confuddled as my ego twist goes up to 4.8v

[VapingBad]

Jul 15, 2014 14:53:51 GMT robby said:

Jul 15, 2014 14:50:50 GMT dalealan said:

Funnily enough I thought it looked like primer. Black it is then. Do you charge using the usb socket robby or do you take the batteries out and use an external charger. Not too sure the screws would put up with that much punishment.

That`s my thinking as well, it`ll be on the USB while I am at the computer and see how it goes. Going to look into magnets which would have to be glued to the case and cover being aluminium

The lid look concave form the pics and you could glue magnets in that top & bottom and under the circuitry cover (do these first so you know to place them on the lid) and maybe one in the other side of the cover that would pull the cover gently onto the far edge of the battery.  I was advised by a home mod maker to use N42 as N54 are to brittle & I used rectangular 8mm x 5mm x 1.5mm N42 ones on mine (not a Hana) doubled up inside and a single ones on the cover (total of 6) and it is held very firmly, I don't think that you would need to double up, you can tape them in to position to get a feel for how well they hold & how hard or easy it is to open before gluing.