vamo problem

[sn1p3rh4t3r]

My vamo has just fallen over, I had it stood up vertical knocked it over. Didn't think much more about it untill I heard my atty crackling away without the button being pressed. So I took battery out, removed atty then put it back together, problem still there atty crackling away all on its own, can't see any obvious shorts, can anyone help, cheers

[DiscoDes]

Has the fire stuck in the on position?

If it is stuck in, try tapping it or pressing and releasing it to free it.

[mybad]

is the fire button still springy/clicky .

[markm]

Has your button managed to shift in its housing?
The external part of the button is just a disc that sits on top of the actual button inside.
With a sharp jolt ican imagine it moving sideways and wedging itself between the tube and
The actual switch.
Sorry but that's all I can think of without having it in front of me.

[sn1p3rh4t3r]

Switch seems ok, switching on and Off as it should, getting 3.7v when it switched off

[mybad]

Has the info on the screen moved upwards as you view it when switched on.

[sn1p3rh4t3r]

Screen seems to be in same position, something not quite right, the section of the vamo with the board in getting quite warm

[mybad]

Sounds as if Live wire has broken off and touching the inside of the case.

[mybad]

Been a long while since I stripped a Vamo down , easy enough to do though to check things out.

[markm]

Heat is always a warning with electricity, take the battery out, it needs taking apart
And checking over carefully before another goes in.

[Q]

Sounds like a job for......

Super ronaldo

[sn1p3rh4t3r]

All stripped markm, I'll have a look later. Thanks guys

[sn1p3rh4t3r]

It's not overheating now, now it won't fire up atty, screen working, reading atty resistance, but wont vape now

[mybad]

So did you take the top off and the board out.

[sn1p3rh4t3r]

I got the top Off, had a look inside both wires attached and look ok, no obvious signs of a short, did smell a bit funny though, so I've gone from it firing up on its own accord to it not firing at all, I didn't take board out though