Orange Gizmo

[Super-Shiny]

Jun 27, 2014 20:58:01 GMT jackcustard said:

If you watch the video that's how it seems. This is my first mech mod and decided to get it, one of the main reasons being its simplicity. No mention of gluing on the video. It was magnetised to the battery... I don't understand why the need to glue it?!?! (I know the instructions said so, I wonder why they said this when I don't recall it being mentioned in the video...

The video shows it to be very set up and go.

Ain't got a clue, only going by what smifee said about faff free, not going to watch the video as i ain't got one and don't want one

[smifee]

Jun 27, 2014 20:58:01 GMT jackcustard said:

Jun 27, 2014 20:53:57 GMT Super-Shiny said:

Ain't read all about this glue thing but i think i would be the same, don't like faffing....and glueing things is not my cup of tea, set up and go is my cup of tea

If you watch the video that's how it seems. This is my first mech mod and decided to get it, one of the main reasons being its simplicity. No mention of gluing on the video. It was magnetised to the battery... I don't understand why the need to glue it?!?! (I know the instructions said so, I wonder why they said this when I don't recall it being mentioned in the video...

The video shows it to be very set up and go.

This is my second mech mod. The first is a Mor Crann which worked straight out of the wrapping.

Just watched the first part of the video and if I had seen that I would have been concerned about the magnet moving & touching the side. Being a tech numpty I don't know if that is a reasonable concern. Maybe so as the instructions say to glue it.

I believe only 5 AAEC members got theirs today. Another of the 5 has told me they are going to sell theirs.

[Romney]

Jun 27, 2014 21:10:31 GMT smifee said:

Jun 27, 2014 20:58:01 GMT jackcustard said:

If you watch the video that's how it seems. This is my first mech mod and decided to get it, one of the main reasons being its simplicity. No mention of gluing on the video. It was magnetised to the battery... I don't understand why the need to glue it?!?! (I know the instructions said so, I wonder why they said this when I don't recall it being mentioned in the video...

The video shows it to be very set up and go.

This is my second mech mod. The first is a Mor Crann which worked straight out of the wrapping.

Just watched the first part of the video and if I had seen that I would have been concerned about the magnet moving & touching the side. Being a tech numpty I don't know if that is a reasonable concern. Maybe so as the instructions say to glue it.

I believe only 5 AAEC members got theirs today. Another of the 5 has told me they are going to sell thei

[geordie_vaper]

Jun 27, 2014 19:25:06 GMT Super-Shiny said:

You have beat me for selling something so quick

and me haha

[Super-Shiny]

Jun 27, 2014 21:16:39 GMT geordie_vaper said:

Jun 27, 2014 19:25:06 GMT Super-Shiny said:

You have beat me for selling something so quick

and me haha

Lets face it, there is only one mod and it's The Godfather:

[fiddles]

I have had a magnet move & make a short to the tube ( not on a gizmo ), so yes it is reasonable concern, that is why it is recommended to put a dab of glue on magnet & stick it to the battery.

[Steve (VapeStorm)]

Ill be using a small strip of insulation tape around the edge of the battery and magnet. Ill report back when Ive done it

[manicmedic]

I'd imagine glue would act as a barrier, affecting connectivity.

[decoy]

defo not in to gluing anything to a batt or damaging the bat
a plastic washer might be the way forward(to put magnate in)

[Steve (VapeStorm)]

Jun 27, 2014 22:13:48 GMT decoy said:

defo not in to gluing anything to a batt or damaging the bat
a plastic washer might be the way forward(to put magnate in)

A little insulated capsule for the magnet would be a great idea. Maybe @ishy could use this on another production run

[ronaldo]

don't know if this would work but I would get a tap washer and put a pop rivet in the middle and use that

[Steve (VapeStorm)]

Jun 27, 2014 22:17:42 GMT ronaldo said:

don't know if this would work but I would get a tap washer and put a pop rivet in the middle and use that

I was thinking along similar lines but with out the rivet

[ronaldo]

Jun 27, 2014 22:22:00 GMT Steve (VapeStorm) said:

Jun 27, 2014 22:17:42 GMT ronaldo said:

don't know if this would work but I would get a tap washer and put a pop rivet in the middle and use that

I was thinking along similar lines but with out the rivet

but with the rivet being made of aluminium it will allow the flow of electricity without restriction

[jackcustard]

Couldn't the magnet be glued to the button?

[VapingBad]

Jun 27, 2014 22:23:57 GMT ronaldo said:

Jun 27, 2014 22:22:00 GMT Steve (VapeStorm) said:

I was thinking along similar lines but with out the rivet

but with the rivet being made of aluminium it will allow the flow of electricity without restriction

It needs a magnet to repel the centre of the switch on this mod.