Squonkers! Unite! You can only lose your drips.

[izan]

Hi pep,
REO-nut here.

Rob sells the 6ml bottles and the tubing on his site : www.reosmods.com/index.php?option=com_virtuemart&Itemid=9&vmcchk=1&Itemid=9

The tubing that is used by Rob at REO's Mods is:
Tygon® Sanitary Silicone Tubing 1/16" ID x 3/16" OD with 1/16" Wall, www.usplastic.com/catalog/item.aspx?itemid=23278&catid=799

I have a few extra 6ml bottles and an extra silicon tube or two.
PM your details and I'll post a 6ml bottle/tube and pre-drilled "dropper" top out for you.

Cheers
Happy squonkin'

Izan

[Pepperty]

izan You are a sweetheart!
Thanks very much for your kind offer, I'd love to take you up on that!

I'm still non the wiser with these squonker bottles as there seems lots of different designs and set ups but I wanted to try them out. I'm using a little bf igo s dripper and it's a surprisingly decent vape

So far so good, just fiddly remembering to regularly squeeze bottle but you get a feel for when dripper is getting a drying out wick - luckily it's not a hideous dry hit alert!

I did accidentally blow instead of suck earlier and boiling hot stream shot out of atty airhole and burnt my thumb which was on the button....

I've not got the world's best coordination? oops

[Pepperty]

izan I've just noticed that you are in Spain. I'm worried about your postage costs?

I'll tell you what, I'll go and check out a few shops locally and see if I can trace the silicone piping 1st and if I'm still struggling I can drop you a pm then?

[izan]

I had the Igo-S but passed it on, the deck was a bit low and the top wasn't nearly secure enough for me...however, it did pump out the flavour and vapour. Now I use the Vicious Ant Cyclone or a REOmizer 2.0. Both have fantastic flavour and are easy to build, (RM2 is easiest)compact 14mm bottom feed drippers.

Depending on the wick you use, you might be able to leave your tails a wee bit longer to get a few extra pulls between squonks.
I tend to cut my wicks short (~2mm dia coil/cotton) and can "safely" get 4 big pulls, but that is with a full squonk. (over the air hole, wick/coil submerged).

I run my airhole on top now, opposite of my button...(no more lava burns on my face or fingers)

PM incoming

Cheers
I

ETA: postage would not be more than £2.00... No worries.

[Pepperty]

I was a bit dubious about the igo s when I first got it, its got no weight to it but neither has a wooden mod - so they actually pair up well once I popped a nice drip-tip it looked much better

I've done a microcoil and am using rayon wick, its fairly long so I get a decent amount of pulls in between a squonk. I think I'll just play around with all the options and see what I like most, at the moment its feeling a bit of an airy draw? but then I probably need to tweak my coil, I have hammered it a bit
But it is my 1st experience with both a dripper and a wooden mod so its a learning curve

I've pm'ed you back Izan, and thank you very much

[Hardyboater]

My squonking set up
Love the flavour. :-)