unicoil heads

[ragjoy]

my wife just received a starter kit from virtual vape.
this has a pyrex clearomiser, ive tried this a few times and so far it seems a much better experience than my boges in a kir fanis tank, although there is a little bit of leakage into the mouthpiece if left in her bag laid flat EDIT: this could of course be due to my filling incorrectly on the very first go.
ive been using these for 3 years or so now and have been very happy with them and still am.
i dont follow the new gear but did try an iclear that came with my mvp, i didnt really rate this at all.
is there a good clearomiser tank that will take these unicoil heads better than other clearomiser tanks.
i dont want to go the route of coiling, i did try this a couple of years back and got the ache with it very quickly.
i just like it simple but effective, i am also a lover of inexpensive (yep tight).
i use a provari, mvp and recently a zmax so any tank would need to be 510.

i was wondering as well, do many vapers now not bother with mods and just go with ego/evod batteries to avoid all the hassles you can get with mods.

thanks, raggy.

[lairey]

IIRC, the unicoil will fit any of the Protanks and Aerotanks, including the Mows as well. If you go down the protank route, I'd advise getting one of the airflow controllers to go with it, the Aerotanks have these as standard.

Personally, I mainly use regulated mods. Can't be bothered with the faff of mechs, particularly as I like to increase and decrease my power levels throughout the day

[igual]

I'd recommend the protank 2 with the additional airflow controller.and joncos Atty heads. I find it a much better vape than the nautilus with bvc coils and its half the price. This setup beats many £20 tanks tbh I'd say it's the best non rebuildable setup I have used.
myepack.co.uk/clearomizers/protank-2.html
myepack.co.uk/accessories/kanger-airflow-control-valve-v2.html
virtual-vape.co.uk/store/products/unicoil/

[Virtual Vape]

Well all being well we will be stocking the emow kit and and the mow tank soon.

[Roscopecotrain]

If you use the Unicoil with something with airflow controller on it the unicoil steps up yet another level. Works a treat in my mow, aerotank.

Sent from me from some far away land.

[decoy]

+1 for aero/pro tank(the mega aero will look better on your mods as its 22 mm)if you get a protank defo add the air controller as not only do it help with fine tuning but stops all leeks down the 510
the mow is a nice tank but its ego threaded only

so in the end idd suggest the aerotank mega as its the same size as your mods
or as i just found
myepack.co.uk/clearomizers/kanger-genitank-mega.html
cheap aerotank mega lol

[ragjoy]

thanks everyone i will have a read up on the suggestions and get one in the week.
are many tanks of these susceptible to a bit of leakage, on my boge kir fanis setup i cant recall ever having any leakage in two years and im still on original rubbers.
i know mines a different setup but id thought the developers would have sorted this by now or is it just user error.

[decoy]

tbh they shouldn't leek but will most probably seep a small amount but that's due to the coil heads and if you get a tank with the air control on it they wont seep on to your mod as it collects in the air control valve

[ragjoy]

Sept 6, 2014 19:27:33 GMT decoy said:

+1 for aero/pro tank(the mega aero will look better on your mods as its 22 mm)if you get a protank defo add the air controller as not only do it help with fine tuning but stops all leeks down the 510
the mow is a nice tank but its ego threaded only

so in the end idd suggest the aerotank mega as its the same size as your mods
or as i just found
myepack.co.uk/clearomizers/kanger-genitank-mega.html
cheap aerotank mega lol

75mm long that seems enormous for a tank, am i reading that link right?.

[decoy]

Sept 6, 2014 20:11:39 GMT ragjoy said:

Sept 6, 2014 19:27:33 GMT decoy said:

+1 for aero/pro tank(the mega aero will look better on your mods as its 22 mm)if you get a protank defo add the air controller as not only do it help with fine tuning but stops all leeks down the 510
the mow is a nice tank but its ego threaded only

so in the end idd suggest the aerotank mega as its the same size as your mods
or as i just found
myepack.co.uk/clearomizers/kanger-genitank-mega.html
cheap aerotank mega lol

75mm long that seems enormous for a tank, am i reading that link right?.

its looks like they are including the drip tip in that measurement(or i hope they are  )tbh if its 22mm wide they are add guess the tank without the drip tip would be around 45mm mark

[ragjoy]

lol, might need to visit esso every few days.

[igual]

This is a nice small tank www.fasttech.com/product/1804301-wolverine-rebuildable-tank-atomizer-19ml

[decoy]

Sept 6, 2014 20:58:06 GMT igual said:

This is a nice small tank www.fasttech.com/product/1804301-wolverine-rebuildable-tank-atomizer-19ml

if you put good juice in that it would cost you more than the atty

[ragjoy]

well unusually for me ive jumped straight in and gone for the protank 2 with a air valve and a spare pyrex £16 with p+p.
so thanks for all the advice everyone.

[thec]

Just a tip, regardless of what clearomizer or coil I use, I always try to stand it up or keep it upright, this way it won't leak as much