In need of a new vape pen. Please help me. :)

[Pepperty]

Hiya and welcome lots of good info there, another good long life battery is the ileaf istick, smaller than the MVP and battery life is shorter, granted - but it still will do you all day. Its priced at about £30


As for case - I bought a belkin phone pouch from home and bargain that fits the MVP perfectly, it was about a £1! so I reckon if you get the gear and then go and look in the high street, the likes of Home & Bargain, Poundland, B&M sort of places you will find something that'll fit OK without costing a bomb

I also use a crumpler camera case (they come in loads of sizes) for putting my gear in, got off eBay about £3

[djs]

Ooh, complicated questions....

I use 'proper' mods basically for the battery life. I occasionally vape at high power, but mostly this is done with a mechanical mod (one with no electric wizardry).

An MVP (as an example) should last way longer than an eGo battery, and maybe twice as long as a big Variable voltage Spinner or Twist type.
Discounting 26650 light sabres, the longest lasting mod would be an 18650 tube mod (Vamo, Evic, SID) with the biggest capacity battery you can buy.

Once you get far more than 1 day (I've got 3 in the past!) the actual length of time is fairly irrelevant as you charge the next battery while you are using the one in the mod.

However, if you want an out-and-about battery (yep, I don't take mods to work) the 1600 (new) or 1300 (old) Spinner is about as good as it gets.

I get by with

2 Spinners

1 MVP

2 x 18650 mods.

(and then some mechs, for fun).

Trying to be completely unbiased, I would say get a Spinner and use an MVP at home, if you don't want to take the MVP out.
If you want a workhorse mod for home (to vape, while you charge) and want to get even more than an MVP, get an 18650 tube.

[randomorder]

postimg.org/image/x6u9if8cp/ Sorry for the quality of the pic ha!

What can I say, she is a beauty! The difference in vape from an EVOD is crazy! Blankets of vapor!

- When I screw up the tank with the unicoil in and after putting my juice in, there is a small gap where it won't screw any further (I'm guessing due to the blue spacer), should I just leave it? I don't want it to leak.

- There is also a small gap with the beauty ring meets the bottom of the tank. Is it normal? I don't want to pressure anything to go in.

- I've currently set it at 10 W and it's vaping like a dream. Is it really bad to leave it at 10W and vape all day? I know that I would obviously have reduced battery life but should I be catious about going to 10W+?

Thank you.

[djs]

That is great!

10w is what I would expect a big-ish tank to need to get going at decent steam.

Congrats.

[dreamylittledream]

Oct 14, 2014 17:46:56 GMT randomorder said:

postimg.org/image/x6u9if8cp/ Sorry for the quality of the pic ha!

What can I say, she is a beauty! The difference in vape from an EVOD is crazy! Blankets of vapor!

- When I screw up the tank with the unicoil in and after putting my juice in, there is a small gap where it won't screw any further (I'm guessing due to the blue spacer), should I just leave it? I don't want it to leak.

- There is also a small gap with the beauty ring meets the bottom of the tank. Is it normal? I don't want to pressure anything to go in.

- I've currently set it at 10 W and it's vaping like a dream. Is it really bad to leave it at 10W and vape all day? I know that I would obviously have reduced battery life but should I be catious about going to 10W+?

Thank you.

You don't want to use the blue spacer in an evod with a unicoil - its for duel coil tanks like the aerotank that have a higher chimney.

Take it off and replace it with the silica gromit that was also in the bag - that is the one for use in single coil tanks like the evod/protank 1/II etc