Upgrading the end of the month to clouper t5

[brummiematt]

Thank you both for help and advice, just placed order with fasttech, ile let you know how i get on when they turn up, once again thank you guys

brummiematt

[decoy]

np just remember if you gave got the tank from fast tech that it uses 2 coils so if you put 2x 2ohm coils on it it will be a 1 ohm atty so maybe order some 2.5/3 ohm coils

[brummiematt]

Nov 17, 2014 0:18:10 GMT decoy said:

np just remember if you gave got the tank from fast tech that it uses 2 coils so if you put 2x 2ohm coils on it it will be a 1 ohm atty so maybe order some 2.5/3 ohm coils

hi decoy
           ordered a selection of ready made coils for the kangertech mini heads between 1.5 oms to 2.0 oms, also brought oms meter, silicon wick and cotton, so i should have the things i need to rebuild the large amount of hardly used heads in my collection pot. was abit concerned about the original kangertech mini coils ( heads ) as thay are dual coils, but now been cleared that i can build them with just the one coil inside and any room just pack it out with some extra cotton/wick.

was about to order the orchid RDA, but read some reviews and was some issues people had with it leaking, so opted out of getting the RDA for now, tho i now wish i did get it has this would have been an ideal starting re-buildable atty to learn about them and about coiling and wicking a RDA ( just like you adviced me to ) so for now the plan is to re coil all my kangertech heads and carry on with my mini pro 3's and for the new aerotank turbo's when i pick it up end of the month at least recoiling wont be a issue now for the turbo tanks.

then as a Christmas treat, i plan to get a re buildable RDA atty which should be fine to go on the t5 or the itaste 134, at this point coiling a rda shouldn't be to difficult, just need to do the maths on the oms.

ps the note above what was that aimed for about 2x2ohm and will then be a 1ohm atty.

[decoy]

Nov 17, 2014 21:42:08 GMT brummiematt said:

Nov 17, 2014 0:18:10 GMT decoy said:

np just remember if you gave got the tank from fast tech that it uses 2 coils so if you put 2x 2ohm coils on it it will be a 1 ohm atty so maybe order some 2.5/3 ohm coils

hi decoy
           ordered a selection of ready made coils for the kangertech mini heads between 1.5 oms to 2.0 oms, also brought oms meter, silicon wick and cotton, so i should have the things i need to rebuild the large amount of hardly used heads in my collection pot. was abit concerned about the original kangertech mini coils ( heads ) as thay are dual coils, but now been cleared that i can build them with just the one coil inside and any room just pack it out with some extra cotton/wick.

was about to order the orchid RDA, but read some reviews and was some issues people had with it leaking, so opted out of getting the RDA for now, tho i now wish i did get it has this would have been an ideal starting re-buildable atty to learn about them and about coiling and wicking a RDA ( just like you adviced me to ) so for now the plan is to re coil all my kangertech heads and carry on with my mini pro 3's and for the new aerotank turbo's when i pick it up end of the month at least recoiling wont be a issue now for the turbo tanks.

then as a Christmas treat, i plan to get a re buildable RDA atty which should be fine to go on the t5 or the itaste 134, at this point coiling a rda shouldn't be to difficult, just need to do the maths on the oms.

ps the note above what was that aimed for about 2x2ohm and will then be a 1ohm atty.

if you use 2 coils in one atty/tank the resistance halfs so if you use 2 one ohm coils the atty will end up at .5 ohm  not 2 ohms if that make sense(more aimed at if you got the orchid because its a twin coil job
the link i put up was the 1st one i came to there would be better ones on there and im sure peps on here will trll you what ones work well

[dalealan]

Can't go wrong with this shiny bugger for just over a fiver as the post holes are huuuuge and you can put twisted coils in or whatever you fancy www.fasttech.com/products/3028/10009074/1950500 once you've mastered recoiling kanger heads rda's are a doddle. Think the orchid gets a few bad reviews down to peeps giving up on the wicking stage as that'll be what causes the majority of leaks but it's a learning process. Once you find what works for you you're golden

[brummiematt]

Nov 17, 2014 21:48:01 GMT dalealan said:

Can't go wrong with this shiny bugger for just over a fiver as the post holes are huuuuge and you can put twisted coils in or whatever you fancy www.fasttech.com/products/3028/10009074/1950500 once you've mastered recoiling kanger heads rda's are a doddle. Think the orchid gets a few bad reviews down to peeps giving up on the wicking stage as that'll be what causes the majority of leaks but it's a learning process. Once you find what works for you you're golden

Hi dalealan
               thanks for that. when i started looking into the rda ( like decoy mentioned i should do because i would be very surprised on how they preform compared to the kangertech turbo's im picking up next week  ) anyway i started looking into rda's and had my eyes on the  SQuape R[eloaded] Blimey what a piece of engineering that is ( i do like nice things ) at £116 i still think its a small price to pay compaired to how much i am saving on the white sticks of hell, it was going to be my Christmas treat to get this, but i have just replied to someone on the site selling a new clone of this for £20, just waiting to hear back, if that fails then i will stick to the original plan to get the genuine one at Christmas, if this is completely OTT to start with then i will place that order with fastech