Evolve DNA 40 clone temp control - first look :)

[matie33]

i order one, now its on plane (BEIJING, Package sent)

[robby]

Where are you from matie33?

[matie33]

on FT arrive rdna but with 30w and seems poor.

[robby]

Possible reset routine

Remove batteries for system reset then put them back in.
Leave the 510 screw a little high so you dont have to keep adjusting it.
Make sure the atty and mod have not been used for a while so they are at the same temperature.
Press the fire button with no atty on ( to get the same start-up for everyone)
Put the atty on, firm but not tight(nickel build)
Press the fire button.
It should ask "new or same coil"
Hit the up button for new coil.
Set the temperature to 420F or your preference.
Pray
Cross fingers and everything else
Vape away

[matie33]

Poland.
still speaking with kangxin and she says:

kangxinecig (2015-01-30 10:41:03):
if the kx-40d no found anything is ok
kangxinecig (2015-01-30 10:42:15):
because only a little be sent

how to understand that?

[stax]

Translation from non English native speaker:
If no logo when boot up its OK
they sent few out with no logo at boot up sequence

I think the Mandarin language is the second most used worldwide. Must start learning.

[robby]

Jan 30, 2015 9:45:47 GMT matie33 said:

Poland.
still speaking with kangxin and she says:

kangxinecig (2015-01-30 10:41:03):
if the kx-40d no found anything is ok
kangxinecig (2015-01-30 10:42:15):
because only a little be sent

how to understand that?

With difficulty?

[matie33]

mind blow, i wait till mine arrive and see, if it bad i send it back, and then wait till robby focale version arrive and it focale will be good then i order from focale.

[archiecat]

Mine has Vapourflask V3 written on base, and when I turn it on 5 clicks the screen shows KX40-D, it only shows for a very short time!

It's a kangxin one bought last week.

[matie33]

directly from kangxin? fire without delay from sleep? everythink works good?

[Deleted]

Jan 30, 2015 10:09:15 GMT archiecat said:

Mine has Vapourflask V3 written on base, and when I turn it on 5 clicks the screen shows KX40-D, it only shows for a very short time!

It's a kangxin one bought last week.

Ditto

[robby]

Jan 30, 2015 9:39:53 GMT matie33 said:

on FT arrive rdna but with 30w and seems poor.

Just a DNA30 clone with new clothes

[archiecat]

Jan 30, 2015 10:14:36 GMT matie33 said:

directly from kangxin? fire without delay from sleep? everythink works good?

Hi, In normal use it fires up fast enough for me, from sleep it takes a couple of seconds but it seems to take a long time to go into sleep mode.

Yes I'm happy with it, all seems to work good.

[robby]

My batteries just died at 3.34V. On replacing the batteries it just took off where it stopped, same settings, same vape, single button press 

[archiecat]

Yes mine did that, nice to see memory function,,,,,still struggling a bit with the buttons!