Subtank Nano..,,,,WOW!

[Deleted]

Jan 21, 2015 20:31:23 GMT blakey said:

Jan 21, 2015 19:06:06 GMT @letsavit said:

That's the only thing holding me back.....taming the airflow for my preference, why can't they do a tapered slot with full adjustment for all. 

You can set it so that only half of one hole is open which significantly reduces the draw and it stays set
That's how I run mine.
Very impressed with the vape from these things

Yes it's how I had my large subtank...think I'll have to pull the plug on one of these....

[flavourtank]

does it leak?

[Get Off My Cloud]

Jan 21, 2015 21:51:00 GMT flavourtank said:

does it leak?

Haven't noticed any so far.

[flavourtank]

Jan 21, 2015 22:30:41 GMT Get Off My Cloud said:

Jan 21, 2015 21:51:00 GMT flavourtank said:

does it leak?

Haven't noticed any so far.

if it doesn't might have to get one to replace the big subtank.

[Get Off My Cloud]

Nano on Kanger IPOW2
Mini on Sigelei 50W V2

[katiekoo]

So, being on the look out for a great tank to use on my istick, not being into rebuilds as such but just want a really solid, reliable clearo... Will the nano fit the bill??

[richo71]

Jan 22, 2015 10:27:01 GMT katiekoo said:

So, being on the look out for a great tank to use on my istick, not being into rebuilds as such but just want a really solid, reliable clearo... Will the nano fit the bill??

It will, but you will have to use the 1.2 ohm head due to the limits of the istick

[katiekoo]

1.2, ok. Is that because it won't fire at a lower ohm? I've been using protank 2 that flags up at over 2ohm & I'm getting burnt coils. Is lower better? Sorry, I'm not getting the whole ohms, watts & volts thing. I'm better with dogs than electrics... Eek!

[richo71]

Jan 22, 2015 10:35:24 GMT katiekoo said:

1.2, ok. Is that because it won't fire at a lower ohm? I've been using protank 2 that flags up at over 2ohm & I'm getting burnt coils. Is lower better? Sorry, I'm not getting the whole ohms, watts & volts thing. I'm better with dogs than electrics... Eek!

Yeah, the istick will not fire a coil below 1.0 ohm

[Ripshod]

Not just that ^^^^^^^^^^^^ katiekoo. I believe the istick has trouble regulating the power to a coil below 1.8ohms and can overpower a tad. With these subtanks I think you'll be fine at 1.2 ohms, just have to work the power up to a nice level, not just punch the numbers in.

Should be a great vape tho thumb up

[katiekoo]

Great! I'm thinking I might give it a go! Love the look of it apart from anything else. X

[Greigster]

I gave the iStick a go with my Subtank Mini at 20w using the 1.2ohm OCC and worked great.

[katiekoo]

I don't suppose I could trouble you for a picture of the setup you lovely man?

[Greigster]

katiekoo

This is the Mini and not the Nano. It has about a 4mm. overhang at the front and a barely noticeable 1mm. overhang at the sides.

[moodyb]

Jan 22, 2015 10:51:39 GMT Ripshod said:

Not just that ^^^^^^^^^^^^ katiekoo. I believe the istick has trouble regulating the power to a coil below 1.8ohms and can overpower a tad. With these subtanks I think you'll be fine at 1.2 ohms, just have to work the power up to a nice level, not just punch the numbers in.

Should be a great vape tho thumb up

The lowest an iStick 20w will run a 1.2 ohm coil is at 15 watts apparently, according to the wattage chart that did the rounds a while ago.

www.e-cigarette-forum.com/forum/variable-voltage-apv-discussion/601111-eleaf-istick-42.html

About half way down the page.