advice on ipv mini 2 70w 0.5 ohm settings

[banditruss]

hi all jusy got ipv mini 2 70 w using 0.5 ohm coil ,using a kangertech mini subtank,looking for advice on starting settings,currently using mvp20w wth the subtank and 1.2 ohm coil generally start at about 14w for new coil then turning up to 19w after a short while,.so got a nice new set up but looking for advice as i dont want to cock up the settingings straight away and be dissapointed with out come .main flavours at mo are blackjack and fire cracker...but just bought a gew other testers ,high voltage and a few mentholly flavours, absthine,tactical orange,strawberry frost.
Another question should i test theese juice in a particular order to get most from coils ,or do i have to change coils for every flavour,(i know the fire cracker will cover most juices so thats not so bad but dont want all coils to be that flavour only )call me tight but want to get most out of coils ,heard you can clean the coils as well ? any thoughts . Lots of questions i know but all help appreciated 
Thx in advance for your help 
Russ

[richo71]

Hi banditruss, if you are running the Sub-tank with the 0.5 ohm coils they are generally good at around 24-25 watts mainly

[Ripshod]

It's actually printed on the side of the o.5ohm head '15W-30W' so anywhere within that range should work. They do work best in the top half of that range though - so 20-30Watts should hit the spot.

[chykensa]

A dry burn between flavour testings and a new wick should sort you out banditruss - I have no experience of these heads, but the principles are the same for a dripper.
If your device can output the required power, then crank it up a bit, might give you a pleasant surprise (and certainly won't damage anything!)