Being a bit thick

[Deleted]

Ok as im currently in the middle of building my first squonker im having a bit of a dumb moment. 
Ive got the conversion bits for a Fat Daddy v3 and i get the changing over the 510 pin, but what about the other bits. Surely its not as simple as sliding the feed tube down through the top with the oring under it, is it ?

[bigd]

I'm nowhere near your standard but that's the way I see it. It's only a pipe from the bottle to the rda.

[Deleted]

I didnt think it could be that simple

[bigd]

Sometimes we look for problems that aren't there.

[dave]

So long as there is a long enough bit of hollow metal pin sticking down for the feeder tube to join up to it will work. The only problem is that you can get a bit of leakage from the plastic feeder tube and sometimes it is necessary to add a bit of glue where it joins the metal pin (this used to be done with the Reos) or some other means (a metal insert or something) to get a snug connection between the two.

[Deleted]

Mar 22, 2015 19:07:16 GMT dave said:

So long as there is a long enough bit of hollow metal pin sticking down for the feeder tube to join up to it will work. The only problem is that you can get a bit of leakage from the plastic feeder tube and sometimes it is necessary to add a bit of glue where it joins the metal pin (this used to be done with the Reos) or some other means (a metal insert or something) to get a snug connection between the two.

Ok cheers for the info. Ive got the tube that came with the kit but I'll make sure i seal the joint just in case.