what options to vap at 1 - 1.2 ohm ish ?

[clivealive1]

currently use the following and want to try and vap around 1 to 1.2 ohms what are my options.
Can i use any of my current equipement?
might buy a mvp3 or pro

current:
mvp2 /  vamo v4 / vtr  & sigelei zmax v5
with
naultilus and nautilus mini , iclear30's 

[Deleted]

Yes all fine happy vaping

[phatfil]

think the vamo will fail to heat coils less than 1.6ohm?? otherwise all ok afaik

[goneforagasper]

I don't think you can get nautilus coils as low as this if you PM smifee he can probably make you a rebuildable nautilus head at the resistance you want.

Don't know about the iclear ones 

The other option is to move up to Kayfun or similar

[clivealive1]

thanks everyone

[hijack]

The 15W MOD's will start to fall a little short at 1 Ohm, But not by so much that you will need something new.
I vaped a 0.8 on a VTR and it worked OK.

[lisburnvapes]

My adv coils are around the same as you're wanting and I set my wattage at around 13 watts , so your vamo should be fine, in fact I prefer the vape off my vamo as opposed to my hanna clone, I find the vape a lot smoother, hope this helps

[clivealive1]

yes thanks

[smifee]

Jun 8, 2015 18:02:15 GMT goneforagasper said:

I don't think you can get nautilus coils as low as this if you PM smifee he can probably make you a rebuildable nautilus head at the resistance you want.

Don't know about the iclear ones 

The other option is to move up to Kayfun or similar

I only use .32 Kanthal and get the best results in the Nautilus heads with 1.6 to 1.8ohms. Any lower and I feel the coil is too narrow. 7 or 8 wraps seem to handle repeated rewicking better.