Kangertech subtank

[Pepperty]

I have an original that uses those rba decks and you have to take entire top apart with a screwdriver and fit a different top piece in place.

I don't mind but I can see why they have swapped over to the other bases as there's less parts and its far more convenient to swap about from an rba deck to a ready made coil, making teh subtank plus and mini far more versatile and user friendly

[letsavit]

Get This and use them, what you have come duel coiled, just add cotton and you have 10 heads ready to go, no need to change top, dry burn and repeat, much better decks to work on than the mini...IMHO.

[phatfil]

Jun 10, 2015 23:45:57 GMT Ron said:

phatfil

www.fasttech.com/products/2390700

cheers..

[Ron]

Will the big heads that I linked to fit the subtank nano ?

[Ron]

Pepperty letsavit flavourtank Will the big heads that I linked to fit the subtank nano ?

[flavourtank]

Jun 12, 2015 14:54:03 GMT Ron said:

Pepperty letsavit flavourtank Will the big heads that I linked to fit the subtank nano ?

no pal only the subtank version 1

If you change the top bell cap thing for a mini rba top cap would it fit?

[Get Off My Cloud]

Jun 12, 2015 15:44:29 GMT flavourtank said:

Jun 12, 2015 14:54:03 GMT Ron said:

Pepperty letsavit flavourtank Will the big heads that I linked to fit the subtank nano ?

no pal only the subtank version 1

If you change the top bell cap thing for a mini rba top cap would it fit?

No the RBA from the Subtank V1 is too wide to fit into the Nano even if you take the chamber off entirely.

[phatfil]

ok how come the OCC coil heads can fit subtank v1 v2 mini and nano then while these rba heads only fit V1 model only??


well ron U and i will no doubt be scouring the classifieds for subtank V1s for a while then

[Get Off My Cloud]

Jun 12, 2015 17:31:45 GMT phatfil said:

ok how come the OCC coil heads can fit subtank v1 v2 mini and nano then while these rba heads only fit V1 model only??


well ron U and i will no doubt be scouring the classifieds for subtank V1s for a while then

The V1 Subtank RBA head is designed for a 25mm tank it's too wide to fit into the 22mm Subtank Mini or Nano also the chimney pipe on the V1 subtank is shorter than the one on the Mini.
I don't believe there was a plan to make a 22mm tank when they designed the 25mm V1, when they designed the Subtank Plus they designed it to use the RBA from the Mini because the V1 was going out of production being replaced by the Subtank Plus.

Here's the two next to each other you can see the V1 is wider.

[Ron]

Jun 12, 2015 17:31:45 GMT phatfil said:

well ron U and i will no doubt be scouring the classifieds for subtank V1s for a while then

Already ordered one from fasttech

[phatfil]

Jun 12, 2015 18:37:48 GMT Ron said:

Jun 12, 2015 17:31:45 GMT phatfil said:

well ron U and i will no doubt be scouring the classifieds for subtank V1s for a while then

Already ordered one from fasttech

fancy a few doomsday spares  i could do you a great lil deal...

[davetherayon]

I have a V1, which I nearly wrecked by trying to remove the RDA screw-off section with pliers. It's working but the chimney won't go all the way down. Fasttech it turns out do a replacement for $4.69, that was in today's vapemail order

[phatfil]

ron got a link for the fastech V1 subtanks?? my searches are not finding them??

[Get Off My Cloud]

Jun 12, 2015 21:28:36 GMT phatfil said:

ron got a link for the fastech V1 subtanks?? my searches are not finding them??

Focal have them.

Full kit
focalecig.com/Product/SUBTANK-StyleBDC-Bottom-Dual-Coil-ClearomizerSilver-24337

They have another too which is cheaper but that doesn't have the RBA head or the extra top cap i think.
focalecig.com/Product/SUBTANK-StyleOCC-ClearomizerSilver-24377

[Ron]

www.fasttech.com/products/2091304