3Fvape.com -- Hot seller and New products

[Ella]

Today I would like to do a review on the snapdragon Stytle rda clone from 3fvape. The price is $16.99 for free shipping.
The snapdragon style rda has similar out shape as other rdas, if you need to point out the out standing point of its appearance, that would be it's air-hole. But when you open the top cap and you will find it different from other rdas, not with triple post or four post, it has only two posts, one negative and one positive, this makes it easy to build single or dual coil. OK let's start the review with unboxing:

The snapdragon style rda comes in a pretty big white box tube which give me a surprise and I though the RDA would be large


Inside a snapdragon style rda and together a hex key and a bag of spares.




Well let's take the snapdragon out and we can take a close look at it. This RDA is made of 316 Surgical Grade stainless steel. Really nice brush as you can see from the pic. The drip tip is made of Teflon and can prevent you form the heat burning you lips.

The snapdragon's deck comes with 2 post on negative and one positive. Gets it easy to build you own coil with single or dual coils as you want. You can see the air flow tube in the photo. Well I didn't take a good photo to show the air holes, you can easily twist the sleeves and you can adjust to use the air-hole. It has 2 x 3 air holes for single or dual coil air flow using, this will be shown in the coming photos.


The snapdragon deck uses clamps to build the coil, which can gives a really nice firm and good connection of the coil. The air flow tube is connected to the air hole on either side so you can switch the sleeves to adjust the air flow. Use the hex key to adjust the post screws. From the phot you can also see the snapdragon has a big juice well. The air tube is angled 20 degrees so that coil isn't directly over the hole


This atomizer can be 100% fully disassembled for easy deep-cleaning. The center pin is golden and I guess it's plated or brass one. Not sure.



Well the RDA has a wide variety of airflows for dialing in your perfect draw. From the following pic, you can see the 3 air hole on either side of the deck, and 3 slots on the sleeve. Twist the sleeve and you can adjust the air hole.


Well after looking these, I have my single build on this snapdragon style RDA.



You can visit blog.3fvape.com for more reviews.

[Ella]

Nov 6, 2015 11:49:23 GMT mxethey said:

@ella can you tell me when snapdagon order TCHNGDNGJ will ship please
i ordered on the 30/10/15 and it said in stock

My friend,
This is the tracking number: LX919426801CN.
 Have a nice day.

[Ella]

Good news! Now Silverplay nano clone RTA has the lowest price of $9.99. I cannot believe it. It's 3.2ml tank capacity with Bottom fill screw. So don't miss the chance.

[Ella]

Steam-crave aromamizer rdta rebuildable tank atomizer-$28.48 for free shipping on 3fvape.com.

[Ella]

Pre-order box tres equis style mechanical mod just $28.99 for free shipping on 3fvape.com.

[Ella]

Itsuwa rage 3-in-1 rda / rta / sub-ohm tank are in stock now. It can be shipped in 24 hours during working days. Use the coupon code “Rage3in1″ and have 10% off getting this great atomizer at only $29.99. So don't miss the chance.

[Ella]

Nookie v2 clone mechanical box mod $29.99 for free shipping on 3fvape.com.

[Ella]

Komodo sub ohm tank clearomizer $24.99 for free shipping on 3fvape.com. There are two colors available. It comes with 0.15 ohm Ni200 temperature control coil head and 0.7 ohm coil head (works with 30~160W).

[Ella]

Aeronaut clone rda atomizer $9.99 on 3fvape.com. There are four colors available.

[Ella]

Today let me recommend some atomizers, so let's check them out below:
Atomizers:
Pre-order authentic playboy vixen mini top / bottom filling tank, there are five colors for your choice.


Pico clone rta rebuildable tank atomizer, Adjustable airflow: 2mm x 3 air holes.


Kayfun monster mini style rta rebuildable tank atomizer, and there is an adjustable airflow from the bottom.

[Ella]

Authentic air force one rda atomizer-$12.99, There are 6 holes on the each side of deck that brings air from the bottom to the coil.

[Ella]

Today we are going to view on the Kayfun Mini Clone RTA. It's stainless steel construction, comes with PC transparent tube.

Alright let's see what we get:
This is a little box, nothing else written on it except "Kayfun Mini" and a logo.

Let's open it up and this is what you get, you get a pack of spare parts, (extra orings, screw driver, some screws), you get your kayfun mini tank, with a drip tip.




Let's take it up and put the drip tip on, the drip tip, I think it's acrylic or PC. It's about 43mm talk without drip tip, and about 55mm talk with the drip tip on. Pretty mini compared with other kayfun tank.



Let's go ahead and take them apart, You got deck, pc tube, chimney, top cap and drip tip. Chimney is screwed to the deck while other parts just plug and unplug, fasten by the o-ring, the deck with the tube, and the tube with the top cap, the top cap with the drip tip.


Take a close look at the build deck. their are 2 air hols on both side of the deck and you can take the airflow sleeves apart to clean. the 2 air hole come in about 1.5mm diameter.



The build deck, make of stainless steel, however the positive part is golden, I am not sure it's stainless steel with copper plated, or it's a piece of copper, will update if I have further details. Air hole on the top, about 2mm.



The center pin is adjustable by the way, you can use your screw drivers to adjust so you can put it on mod whatever you want. Also, screw the center pin out and you can see clearly the isolator.


Please click the link: blog.3fvape.com/atomizer/kayfun-mini-style-rta-review/ for more information about the review.

[Ella]

Alliance clone rda atomizer $11.99 on 3fvape.com. There are two colors available (silver and black).

[mxethey]

Ella
 
Just received snapdragon rda order number TCHNGDNG and the item is faulty
When cleaning the rda i noticed the plastic insert is blocking the air holes no matter how you tighten it up

[sydsut]

Nov 23, 2015 8:53:44 GMT mxethey said:

Ella
 
Just received snapdragon rda order number TCHNGDNG and the item is faulty
When cleaning the rda i noticed the plastic insert is blocking the air holes no matter how you tighten it up

Could you please look into this Ella  for mxethey