Custard RDA setups?

[lee]

Hi guys, just going to throw this out there for inspiration really   are any of you using a RDA with custard based vapes? If you are what is your setup Ohm's, Single or Duel Coil, Watt's, Kanthal gage or Ni? Cheers in advance, just want to get the best from my custards 

[Get Off My Cloud]

Yeah i drip custards i don't bother with any kind of special build though.

[lee]

Get Off My Cloud what is your setup? just out of interest?

[blakey]

Custards. I use a single micro coil around a 3mm or 2mm former depending on attie.
I coil between 1.4 & 2.0ohms and hit it with between 9-10ohms.
I personally don't like too much power through custard as it changes the flavour significantly IMO.

Temp control, I coil to about 0.15ohms and set temp between 380f & 400f using a spaced coil.

[Get Off My Cloud]

Jun 11, 2015 9:20:00 GMT lee said:

Get Off My Cloud what is your setup? just out of interest?

Usual setup is .4mm kanthal 8 wraps round a 2.5mm mandrel dual coil setup, comes out between 0.4 and 05ohm.
I generally vape custards at a little lower watts like 35-40w instead of the usual 55-60w.

[lee]

blakey thanks for that buddy, im currently setup at 1.4ohms single micro 2mm running at about 10ohms, it is lacking a bit of flavour so might up the ohms a little and try that, or maybe i have just wicked it shite oh and thanks for the Temp control info my Ni came today so will give it a go at the weekend

[lee]

Get Off My Cloud holly s**t, do you get good flavour of that? Wattage like that sounds mentals, well to me anyways, but hey i might just have to give it a shot? The vape must be hotter than mamma's custard straight out of the pan!!

[blakey]

Jun 11, 2015 9:37:47 GMT lee said:

Get Off My Cloud holly s**t, do you get good flavour of that? Wattage like that sounds mentals, well to me anyways, but hey i might just have to give it a shot? The vape must be hotter than mamma's custard straight out of the pan!!

His set up looks like it's for direct lung inhales

[Get Off My Cloud]

Jun 11, 2015 9:37:47 GMT lee said:

Get Off My Cloud holly s**t, do you get good flavour of that? Wattage like that sounds mentals, well to me anyways, but hey i might just have to give it a shot? The vape must be hotter than mamma's custard straight out of the pan!!

I tend to direct lung hit with airflow really open so at 40w on an atty with good airflow it's not even warm at that level of watts.

[lee]

blakey Lung inhales....... i doubt you would have any left at that wattage

[lee]

Get Off My Cloud i get you

[geordie_vaper]

try a rda with a ceramic base in them, not 100% sure but think the snapdragon will use a ceramic base

[blakey]

Jun 11, 2015 11:32:58 GMT geordie_vaper said:

try a rda with a ceramic base in them, not 100% sure but think the snapdragon will use a ceramic base

Couldn't agree more, the ceramic base really brings out the flavour from custard juice, bugga to keep clean though

[geordie_vaper]

had no experience with ceramic cups, but i really want a snapdragon

[lee]

Jun 11, 2015 11:32:58 GMT geordie_vaper said:

try a rda with a ceramic base in them, not 100% sure but think the snapdragon will use a ceramic base

Yeh geordie_vaper you know i love my Rose (although can i get a stumpy kit for it... can i bollox ) im waiting for the snapdragon to go on sale, it's official launch is at vapefest i think and as im not going im going to have to wait   have you tried or anyone else tried the Immortalizer RDA that has ceramic base or the smok xpure also? I dont like fairy airy vape you know......