E-grip..................

[phtumshk]

Sept 16, 2015 13:53:14 GMT dave said:

If possible can I have 2 please phtumshk

No worries dave Id added a couple in for you on the off chance you may want em.

[Deleted]

I'll have 2 please if that's ok

[phtumshk]

Sept 16, 2015 14:12:07 GMT @tazmania441 said:

I'll have 2 please if that's ok

No problemo

Ok we have

5 for blakey
3 for Romney
3 for chrisjw
2 for dave
2 for tazamania441
3 for me
only 2 left.

[phtumshk]

Looks like these might be at mine by saturday.
Youve got to hand it to the Germans there very efficient lol.

[Deleted]

Bugger it I'll take the other 2

[phtumshk]

Sept 16, 2015 20:22:27 GMT @tazmania441 said:

Bugger it I'll take the other 2

Damn, I was gonna put em on fleabay for a £10 each.
There like rockin horse sh!t in the UK lol.
So all bases accounted for, we can sort all monies out when Ive bagged em up and posted em out.

[chrisjw]

Sept 16, 2015 2:55:25 GMT Ella said:

Sept 15, 2015 17:08:50 GMT phtumshk said:

No frikin way!

dave  phtumshk  blakey  chrisjw

I am sorry for that I did not get the updated info from my fellow. And our customer service will email you about it.

Ella ............I still have not received any e-mail from your service department regarding this matter. Could you kindly let me know the situation.




"Life...........is just a bowl of tricks!!!!!!"

[Romney]

Yeah same here chrisjw,ill sent them 2 e-mails yesterday,and sent Ella one on here today,asking for a refund if the Joyetech Goods I ordered cant be sent to the UK,but have had no reply,

[Ella]

Sept 17, 2015 10:07:00 GMT Romney said:

Yeah same here chrisjw,ill sent them 2 e-mails yesterday,and sent Ella one on here today,asking for a refund if the Joyetech Goods I ordered cant be sent to the UK,but have had no reply,

Hi, chrisjw and @romney, I will ask our customer service to reply you soon

[chrisjw]

Are they here yet phtumshk ? .................



"Life...........is just a bowl of tricks!!!!!!"

[phtumshk]

Sept 19, 2015 10:38:53 GMT chrisjw said:

Are they here yet phtumshk ? .................



"Life...........is just a bowl of tricks!!!!!!"

According to DHL there somewhere in the country.

[blakey]

One word regarding these bases, at the neck of the base you will find two very thin white o-rings.
Firstly make sure that you have both fitted, there should be plenty of spares in the bag
Secondly and very importantly, lubricate these o-ring well with e-liquid before you fit into the egrip!!!
They are very fragile and easy to break but when well lubricated they are fine.

There will be a couple of spare larger silicon bungs, one of which needs to be fitted to the top of the attie itself, they're a bit of a bugga to fit and they seem like they're too big but if you keep working them they will eventually insert correctly and provide an excellent seal. Patience!
Once fitted you won't have to touch it again.

The rebuildable CLR heads work an absolute treat in the e-grip, so much so that the e-grips are my mod of choice for taking away on hols
The slots in these heads are 2.5mm wide so make sure you build your coil on a 2.5mm former.
I use an M3 screw and make 7 wraps of .3 kanthal around it for a 1.4ohm coil- the inner diameter of the screw between the threads is 2.5mm.
Then I remove from the screw and insert a 2.5mm rod when fitting to the attie. Perfect coils every time.

[chrisjw]

Sept 19, 2015 11:07:16 GMT blakey said:

One word regarding these bases, at the neck of the base you will find two very thin white o-rings.
Firstly make sure that you have both fitted, there should be plenty of spares in the bag
Secondly and very importantly, lubricate these o-ring well with e-liquid before you fit into the egrip!!!
They are very fragile and easy to break but when well lubricated they are fine.

There will be a couple of spare larger silicon bungs, one of which needs to be fitted to the top of the attie itself, they're a bit of a bugga to fit and they seem like they're too big but if you keep working them they will eventually insert correctly and provide an excellent seal. Patience!
Once fitted you won't have to touch it again.

The rebuildable CLR heads work an absolute treat in the e-grip, so much so that the e-grips are my mod of choice for taking away on hols
The slots in these heads are 2.5mm wide so make sure you build your coil on a 2.5mm former.
I use an M3 screw and make 7 wraps of .3 kanthal around it for a 1.4ohm coil- the inner diameter of the screw between the threads is 2.5mm.
Then I remove from the screw and insert a 2.5mm rod when fitting to the attie. Perfect coils every time.

I haven't attempted it yet blakey , but how do you dismantle the rebuildable atty head?




"Life...........is just a bowl of tricks!!!!!!"

[chrisjw]

Sept 19, 2015 11:07:16 GMT blakey said:

One word regarding these bases, at the neck of the base you will find two very thin white o-rings.
Firstly make sure that you have both fitted, there should be plenty of spares in the bag
Secondly and very importantly, lubricate these o-ring well with e-liquid before you fit into the egrip!!!
They are very fragile and easy to break but when well lubricated they are fine.

There will be a couple of spare larger silicon bungs, one of which needs to be fitted to the top of the attie itself, they're a bit of a bugga to fit and they seem like they're too big but if you keep working them they will eventually insert correctly and provide an excellent seal. Patience!
Once fitted you won't have to touch it again.

The rebuildable CLR heads work an absolute treat in the e-grip, so much so that the e-grips are my mod of choice for taking away on hols
The slots in these heads are 2.5mm wide so make sure you build your coil on a 2.5mm former.
I use an M3 screw and make 7 wraps of .3 kanthal around it for a 1.4ohm coil- the inner diameter of the screw between the threads is 2.5mm.
Then I remove from the screw and insert a 2.5mm rod when fitting to the attie. Perfect coils every time.

I have no plans on going away on hols in the near future blakey , but is it ok to take the e-grip to the shops & around the house too ?..................................




"Life...........is just a bowl of tricks!!!!!!"

[blakey]

Sept 19, 2015 11:36:29 GMT chrisjw said:

Sept 19, 2015 11:07:16 GMT blakey said:

One word regarding these bases, at the neck of the base you will find two very thin white o-rings.
Firstly make sure that you have both fitted, there should be plenty of spares in the bag
Secondly and very importantly, lubricate these o-ring well with e-liquid before you fit into the egrip!!!
They are very fragile and easy to break but when well lubricated they are fine.

There will be a couple of spare larger silicon bungs, one of which needs to be fitted to the top of the attie itself, they're a bit of a bugga to fit and they seem like they're too big but if you keep working them they will eventually insert correctly and provide an excellent seal. Patience!
Once fitted you won't have to touch it again.

The rebuildable CLR heads work an absolute treat in the e-grip, so much so that the e-grips are my mod of choice for taking away on hols
The slots in these heads are 2.5mm wide so make sure you build your coil on a 2.5mm former.
I use an M3 screw and make 7 wraps of .3 kanthal around it for a 1.4ohm coil- the inner diameter of the screw between the threads is 2.5mm.
Then I remove from the screw and insert a 2.5mm rod when fitting to the attie. Perfect coils every time.

I haven't attempted it yet blakey , but how do you dismantle the rebuildable atty head?




"Life...........is just a bowl of tricks!!!!!!"

Same as early kanger heads, pull the metal pin from the bottom, remove the silicon seal
Unscrew the top from the attie and that's it.

Simple as simple can be- which means that you will screw it up immediately