Lava Tube tips to get off to a good start

[Globalbloke (Tim)]

Mar 14, 2012 22:52:04 GMT maccafan said:

Mar 14, 2012 22:41:31 GMT jlowdo said:

thx. are those clearomizers £5.30 each? ( does that website have a discount code and or delivery charges )??? but i need the adaptor to use them on the LT correct? what OHM would would go of with them.

because the tanks only work out at £6.80 with the discount code from freedomvape ... does anyone know what there minimum free delivery is, there is a "*FREE UK SHIPPING" but can't see what the * refers to ..hmm....

FV Uk shipping is free as far as I know.

You can pick Vision Stardust 2.5-2.9 ohms from ecigwizard for £4.37 each with free shipping using discount code ECR69.

www.ecigwizard.com/shop/en/cartomisers/402-vision-ego-clearomiser.html

Go for the higher resistance ones since you got a VV device and you can step up the voltage. Will give you more vapour.

See, I got it wrong, ah well, glad it was corrected before you ordered, sure mine will be just fine

[maccafan]

It'll be fine GB..

Since you got both got a VV device you can step up or step down voltages to suit. The higher resistance one should have more turns of the coil so will give you a tiny bit of more surface area, so more vapour.

[jlowdo]

Mar 14, 2012 22:55:16 GMT Globalbloke (Tim) said:

Mar 14, 2012 22:52:04 GMT maccafan said:

FV Uk shipping is free as far as I know.

You can pick Vision Stardust 2.5-2.9 ohms from ecigwizard for £4.37 each with free shipping using discount code ECR69.

www.ecigwizard.com/shop/en/cartomisers/402-vision-ego-clearomiser.html

Go for the higher resistance ones since you got a VV device and you can step up the voltage. Will give you more vapour.

See, I got it wrong, ah well, glad it was corrected before you ordered, sure mine will be just fine

soif i get the stardust from ecigwizard, do i need some type of adaptor for the LT??

[maccafan]

Yes a 510 to Ego adapter..

Edit:

ecigwizard is OOS. You can pick one up here:

freedomvape.co.uk/shop/article_34/Lavatube-510-Ego-Tank-connector.html?shop_param=cid%3D6%26aid%3D34%26

Cheaper with discount code HOLIDAY15.

[jlowdo]

sure its free delivery from freedomvape mccafan?

[maccafan]

Mar 14, 2012 23:15:43 GMT jlowdo said:

sure its free delivery from freedomvape mccafan?

Add it to the cart and when you checkout before you pay it should tell you..

I am not sure, no, but I think it's free.

[Perpetua]

It's just my personal preference on adapters for the Stardusts, but I do find the EgoT ones give rather a tight draw . . . so I use 2 510 to 510's , which Daz had in stock last time I looked, along with the Stardusts.

SAVE10 is his dissie code . . .

[jlowdo]

What is daz' URL plz...?

[Perpetua]

Sorry James, me bad . . . Daz is Safercigs.


www.safercigs.co.uk/Vision_Ego_Clearomizers_16ml/p705283_5779009.aspx


Adapters . . .

www.safercigs.co.uk/Adapters/p705283_5610427.aspx

[dave]

Just to add a point on the LT. You can use lower resistance devices on it, the limiting factor is the amount of current it will draw which is about 2.5 amps. So, if you use a 2 ohm cartomiser for instance, in theory, you can run it at up to about 5 volts, a 1.5 ohm cartomiser will in theory go up to about 3.7 volts. Practical tests suggest these are a tad optimistic. If you go too high it simply adjusts the voltage down - but it doesn't tell you, so it will still register the voltage you set it at. I would guess that most people probably prefer running standard resistance (about 3 ohms) things on it and upping the voltage to suit, personally I like 2 - 2.5 ohm things at 4ish volts,but you can play around with it and find out what suits you.

[maccafan]

In practice do you find that the LT does not regulate voltage output Dave?

[dave]

Mar 16, 2012 0:46:18 GMT maccafan said:

In practice do you find that the LT does not regulate voltage output Dave?

As far as I can tell it regulates the voltage OK to what you set it at, in the sense that with the same thing on it at the same setting, you get a consistent experience whatever the state of charge of your battery. What varies is the voltage under load which will change with different things on it and can go down quite sharply when you get into the 1.5 ohm type areas. I don't use anything that low in resistance on it so I can't speak from experience on that, just demonstrations I have seen.

[maccafan]

Thanks Dave..

[jlowdo]

is there a built in cut off for the LT? it appears mine stops producing vapour after a few seconds ( maybe 5 )

[blakey]

Mar 18, 2012 18:48:16 GMT jlowdo said:

is there a built in cut off for the LT? it appears mine stops producing vapour after a few seconds ( maybe 5 )

Yes but the cut off should be about the 10-12second mark