mini goblin v3

[glen]

Nov 6, 2016 20:22:42 GMT thebishman said:

Nov 6, 2016 20:07:38 GMT glen said:

Very good flavour mate, better than the serpent mini, which is the type of thing its up against, the option of the tank extender is a good idea too

Ah yeah i forgot the extender. That a good idea. Hmmm might end up with one in me basket next order

I'm waiting for the extender after spotting it on fasttech, I don't think you'd be disappointed with the whole kit

[decoy]

I got one thanks to @uncelgromit(top man to buy from had it next day)
well considering ive only done 2 builds in it one in single and one in duel its been surprisingly easy to get it wicked with reasonable results
haven't got it chucking huge clouds yet but I'm not far off what I am getting outa the mk1 prob nee to use less cotton
the single coil setup is hands down better than the mk1 ver as you can fit 3mm coils in and the air flow is better directed over the coils and maybe a bit more than the mk 1
the duel coil setup is prob about the same airflow wise but again its better directed
haven't had a leak yet and it was bouncing about in my pocket all night
1st impressions are v good
if you liked the mk1 youll like the mk3

[decoy]

wee update
stopped being stupid and tried it in mtl with 11 mg nig
0.3 ss wire(smallest I have)3mm id at 1 ohm
flavour and vape is about the same as my kf3 clone but I'm getting nailed by the nic which is a bit strange spesh as I cant taste it


oh and the 510 pin isn't adjustable ,it holds the deck in
if your deck is a little tight to get out ,undo the 510 pin a wee bit and push it down on your desk
out pops the deck but it don't sod off across yer floor under the couch

still don't have the best wick method but this little thing can chuck some decent size clouds
I'm now looking for an ss extension for it lol

[Deleted]

Its a very well built piece of kit. Certainly chucks it out with good flavour. Don't like the drip tip though. I got mine as a complete kit from Provapes with extension. Mine leaked the 1st wicking as I didn't know how to close the air and juice control at the bottom lol.

[decoy]

Nov 16, 2016 13:25:08 GMT @fernau said:

Its a very well built piece of kit. Certainly chucks it out with good flavour. Don't like the drip tip though. I got mine as a complete kit from Provapes with extension. Mine leaked the 1st wicking as I didn't know how to close the air and juice control at the bottom lol.

been using the kayfun mini v3 drip tip as you don't have to take it out to fill up the juice

[Deleted]

Nov 17, 2016 7:00:32 GMT decoy said:

Nov 16, 2016 13:25:08 GMT @fernau said:

Its a very well built piece of kit. Certainly chucks it out with good flavour. Don't like the drip tip though. I got mine as a complete kit from Provapes with extension. Mine leaked the 1st wicking as I didn't know how to close the air and juice control at the bottom lol.

been using the kayfun mini v3 drip tip as you don't have to take it out to fill up the juice

Is that just the kfv3 drip tip  you have or the adaptor/ drip tip? I notice in the box they include a not such good quality black delrin push fit cover and drip tip.

[decoy]

Nov 17, 2016 11:30:35 GMT @fernau said:

Nov 17, 2016 7:00:32 GMT decoy said:

been using the kayfun mini v3 drip tip as you don't have to take it out to fill up the juice

Is that just the kfv3 drip tip  you have or the adaptor/ drip tip? I notice in the box they include a not such good quality black delrin push fit cover and drip tip.

kf3 mini drip tip is just steel
www.fasttech.com/products/0/10020628/4417000-316-stainless-steel-510-drip-tip-for-kayfun-mini

[Deleted]

Thanks Decoy. I thought you meant one of these top caps with tip incorporated thingies lol.
I'm using the uwell crown tip which is ok.

[DaveJ]

Very late to this particular RTA party... But just something extra some may not know about the Goblin Mini V3.

The goblin Mini V3 : FT linky

The Extension Tube: FT linky

The RTA holds about 2 ml and the extension tube adds a further 2 ml for a final total juice capacity of 4 ml. So far, nothing new.

But did you know the extension tubes can be "stacked"? It is possible to add two (or more) extension tubes into your Mini to make a  RTA that holds 6 (or even more if you were being silly) ml. I had no leaking in the short time I was playing with two added in extension tubes.

OK, so I've been playing a bit. This particular atty, in my opinion, more suits those who prefer a less restricted air intake - maybe what some call a Restricted Lung hit. It doesn't seem really happy tightened down to mimic the properly tight MTL draw of, say, the oldie Kayfun Lites. Beyond that, well, I'm a single coil user so that single coil "offsest" deck went in. Works OK for my modest power outputs.

[Get Off My Cloud]

Been puffing away on one for the last week.
I'm normally a dual coil bloke, flavour is just more intense with dual coils i find plus thicker cloudage but gotta say this thing is pretty decent in single coil mode as far as flavour goes, airflow could do with being a little more open though.

P.S if anyone sees the stubby SS drip tip it comes with for sale by itself let me know.

[c1booth]

Waiting on my goblin v3 being delivered

[baconandeggs]

Not to bad but there are to many o rings that could fail and be a pain to get hold of in the future, and it always dumps a little juice out it's bottom when filling and i do remove the tip and close juice flow. Just niggly bits.

great single deck, now if they do that in one piece

p.s

You will need the extension tube

[c1booth]

Hi all I'm having wicking problems with this(I think)
Flavour ain't great and after 2/3 hits get a slight burnt taste until I leave for 5 mins or so
Build is single .4mm round kanthal 3mm 6 wraps .8 ohms normal organic cotton pads ( tried kun do bla boa and got zero taste so ripped it out of this before filling up tank)
Could it be too much cotton. Not enough. Too tight in coil
I know it's hard without seeing the build but any ideas?

edit tried between 15-20w

[decoy]

if im using 3mm id coils i wick it then cut off half the wick tails(less is more)
i try to cut the wick so it dont reach the bottom of juice wells
the more cotton you stuff in this thing the less flavor you seem to get
ive got mine running around the 40 wat mark with ss 3mm id fused clapton in single coil and can chain vape it no prob

so in short
wick it
make wick in to x shape
trim top 2 legs off
put bottom legs in to juice wells
hope that helps

[c1booth]

X shape?