dripper

[c1booth]

Received this morning I'm watching vids seeing how set up

[c1booth]

Will this o-ring be ok
I can't find a way to get into there as it all 1 machines piece
Sorry it's hard to see

[phtumshk]

You mean the white nylon insulator piece?

[c1booth]

Jan 13, 2017 15:46:39 GMT phtumshk said:

You mean the white nylon insulator piece?

No 
inside the juice chamber there's a black oring that should be under a washer type thing but it's sticking out 
but I can't get to the washer to lift it and reposition the oring

[c1booth]

If you click on the top pic you can just about see the oring
And on the bottom pic you can see what it should be underneath

[phtumshk]

Jan 13, 2017 15:55:14 GMT c1booth said:

Jan 13, 2017 15:46:39 GMT phtumshk said:

You mean the white nylon insulator piece?

No 
inside the juice chamber there's a black oring that should be under a washer type thing but it's sticking out 
but I can't get to the washer to lift it and reposition the oring

Ah right.
IIRC the piece with the kidney shaped well holes will (should) unscrew from the base.
Some long nose pliers will be useful.
The center pin will need to be removed for ease.

[c1booth]

Jan 13, 2017 16:25:49 GMT phtumshk said:

Jan 13, 2017 15:55:14 GMT c1booth said:

No 
inside the juice chamber there's a black oring that should be under a washer type thing but it's sticking out 
but I can't get to the washer to lift it and reposition the oring

Ah right.
IIRC the piece with the kidney shaped well holes will (should) unscrew from the base.
Some long nose pliers will be useful.
The center pin will need to be removed for ease.

Thanks your right but the bloody thing didn't come with spares😡🙈
ill check my other tanks to see if I have anything

[c1booth]

The smallest I've got is a couple of mm to big
Anyone know best place to get one

[yourgurnard]

Sorry, I'm a bit pissed & very thick!.....can You go thru' it again re. which 'o' ring You need?.....I've got plenty'a Origen 'o'rings & happy to send to You..........

[c1booth]

Jan 13, 2017 21:04:15 GMT yourgurnard said:

Sorry, I'm a bit pissed & very thick!.....can You go thru' it again re. which 'o' ring You need?.....I've got plenty'a Origen 'o'rings & happy to send to You..........

Hahahaha no problem
take the centre pin out so it looks like this



unscrew centre piece and you see the o-ring at the bottom



it sits there were you can see it and underneath the bottom of this piece



if you have one or could advise what size etc for me to buy then you'd be a star👍

[yourgurnard]

None of My Origens have an 'o'ring under there!
S'long as the white insulator is there then You're ok.
I've chopped these about for squonking & using mesh...the centre assembly just snugs down sans any 'o'ring...

[Grandad]

c1booth did you buy these from m-vapes ? If so drop Matt an email or ring him hes a great guy and sure he could help you out

[c1booth]

Will do