ghostrider1971
Super Member
Joined:July 2016
Posts: 1,876
Location:
Likes: 2,004
Recent Posts
Last Online Aug 24, 2018 16:42:26 GMT
|
Post by ghostrider1971 on Aug 9, 2017 17:23:11 GMT
Ghostrider Stupid Questions PLC is back open for business Evening all, I recently (yesterday...) received my Maze V3 RDA and have been playing around with it.... Using it on the Pico Squonker (yes, I did remember to put the squonk pin in this time...!), it fires a couple of times and then the battery light keeps flashing and the Pico refuses to fire. So far, I have - checked the coil to see if it's touching the side of the metal to cause a short - it isn't - changed battery - same thing keeps happening.... When it occasionally does fire, it's not as great as I expected it to be....my guess is this may be due to my notoriously dire wicking skills... Any ideas/advice/other users input, much appreciated as always
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 30, 2024 21:32:31 GMT
|
Post by Deleted on Aug 9, 2017 17:26:56 GMT
I would check to make sure the poss pin(from bottom to top) isn't touching the deck or the coil isn't touching the airflow barrel.
|
|
decoy
Super Member
Joined:February 2014
Posts: 4,119
Location:
Likes: 3,118
Recent Posts
Last Online Apr 1, 2023 20:12:03 GMT
|
Post by decoy on Aug 9, 2017 18:18:28 GMT
have you tried it on a regulated mod because it do sound like its shorting maybe try stripping it,wash and reassemble it making sure to get the centerpin ect in right cant think of anything else it could be
|
|
phtumshk
Super Member
Joined:May 2014
Posts: 3,758
Location:
Likes: 4,058
Recent Posts
Last Online Nov 15, 2024 13:54:05 GMT
|
Post by phtumshk on Aug 9, 2017 18:22:18 GMT
stick the rda on a mod/ohmeter to check its ok. If its OK and still dosent work you may not be making sufficient contact at the 510 pin. Dunno if the picosqueeze 510 is a floater. Huh-Huh, I said floater.
|
|
blakey
Super Member
Ninja Maestro
Joined:June 2011
Posts: 9,206
Location:
Likes: 4,242
Recent Posts
Last Online Nov 27, 2024 17:26:00 GMT
|
Post by blakey on Aug 9, 2017 18:38:56 GMT
Are you using a coil that is less in ohms than the Pico is rated to fire?
|
|
beedee
Super Member
Joined:July 2015
Posts: 1,705
Location:
Likes: 1,889
Recent Posts
Last Online Sept 11, 2024 12:54:56 GMT
|
Post by beedee on Aug 21, 2017 17:50:01 GMT
Hi ghostrider1971. I have a Maze V3 and a Pico. Maze currently on my Steamcrave (where it works fine!), so I tried it on the Pico, same result as you. Concluded it must be the 510 pin on the Maze not reaching. so I took it off and gave a couple of turns with a slot screwdriver and put it back on. Worked a treat. Not sure if the 510 on the maze holds the positive pole - so best to only turn it slightly and use trial and error until it connects. I love the Maze - I have a Clapton 26/32 in it with 6 wraps @3mm - comes out at 0.59, works great on the steamcrave but might want a wrap or two less for an unregulated like the Pico.
|
|