Kayfun Prime

[Tom]

If anyone has a Kayfun Prime that they didn’t fall in love with then I would love to take it off your hands!

Many thanks folks

[goneforagasper]

I'm guessing you have found a Kayfun Prime Tom, I know you are a Kayfun expert and wonder if you would share the build which you have gone with. I have tried several different builds and am not satisfied with the flavour with any of them.
Any advice would be gratefully received.

Peter

[joeten]

There is some info on kayfuns here

thevaperscafe.freeforums.net/thread/1140/kayfun-coiling-wicking-help?page=2&scrollTo=10457

[Tom]

Nov 21, 2017 11:02:04 GMT goneforagasper said:

I'm guessing you have found a Kayfun Prime Tom, I know you are a Kayfun expert and wonder if you would share the build which you have gone with. I have tried several different builds and am not satisfied with the flavour with any of them.
Any advice would be gratefully received.

Peter

Only one build so far bud but it’s been very good.

0.4mm SS317L 7 wraps spaced around a 2.5mm bit.

Wick tight through the coil but loose in the channels.

I’ve been using a spaced coil but making sure that the wraps are nice and close but not touching.

When you say flavour hasn’t been good, you aren’t getting the density you want or does th vape seen right but just lacking flavour?

Adjusting your coil height could be an answer.

Wick too tight or too loose could also affect what flavour your coil is producing.

I do think some more dabbling is going to fix your flavour, well, I hope so!

[goneforagasper]

Nov 21, 2017 12:11:24 GMT Tom said:

Nov 21, 2017 11:02:04 GMT goneforagasper said:

I'm guessing you have found a Kayfun Prime Tom , I know you are a Kayfun expert and wonder if you would share the build which you have gone with. I have tried several different builds and am not satisfied with the flavour with any of them.
Any advice would be gratefully received.

Peter

Only one build so far bud but it’s been very good.

0.4mm SS317L 7 wraps spaced around a 2.5mm bit.

Wick tight through the coil but loose in the channels.

I’ve been using a spaced coil but making sure that the wraps are nice and close but not touching.

When you say flavour hasn’t been good, you aren’t getting the density you want or does th vape seen right but just lacking flavour?

Adjusting your coil height could be an answer.

Wick too tight or too loose could also affect what flavour your coil is producing.

I do think some more dabbling is going to fix your flavour, well, I hope so!

Thanks Tom , the density is fine its just the flavour. I am comparing against Mini V3 which I find to be very flavoursome.

Just vaping Kanthal 26G 2mm id 0.8 ohms and that does not seem bad - I'll try the build you recommend in my other Prime and see how that works.

Thanks again

[goneforagasper]

Nov 21, 2017 11:43:18 GMT joeten said:

There is some info on kayfuns here

thevaperscafe.freeforums.net/thread/1140/kayfun-coiling-wicking-help?page=2&scrollTo=10457

Thanks joeten I'll have a read

[Tom]

Nov 21, 2017 12:57:55 GMT goneforagasper said:

Nov 21, 2017 12:11:24 GMT Tom said:

Only one build so far bud but it’s been very good.

0.4mm SS317L 7 wraps spaced around a 2.5mm bit.

Wick tight through the coil but loose in the channels.

I’ve been using a spaced coil but making sure that the wraps are nice and close but not touching.

When you say flavour hasn’t been good, you aren’t getting the density you want or does th vape seen right but just lacking flavour?

Adjusting your coil height could be an answer.

Wick too tight or too loose could also affect what flavour your coil is producing.

I do think some more dabbling is going to fix your flavour, well, I hope so!

Thanks Tom , the density is fine its just the flavour. I am comparing against Mini V3 which I find to be very flavoursome.

Just vaping Kanthal 26G 2mm id 0.8 ohms and that does not seem bad - I'll try the build you recommend in my other Prime and see how that works.

Thanks again

Good luck!