Dual coiling a mech help

[thebishman]

Ok...so ive got a dead rabbit.

Im now 100% into mechs and since ive been on the mech journey ive only been using single coil atties.

So... my fav build for single coils is 5 wraps of 0.5 kanthel 3mm I.D. it hits hard and fires up nice. Gives a great warm flavoursome vape and ive sussed how the battery life is effected for the build.

What id like to do is replicate the hit i get on a dual coil build.

Any mech dual coilers in the house??

[Deleted]

well for a dead rabbit (hopefully fresh) you need a big pot a couple of carrots one onion ......
have i got this wrong here ?????

[thebishman]

Dec 11, 2017 20:30:16 GMT @dozerman said:

well for a dead rabbit (hopefully fresh) you need a big pot a couple of carrots one onion ......
have i got this wrong here ?????

Move along mr b road nothing to see here lol

[phtumshk]

If you dual coil in the same wire its like 10 wraps a coil, which aint always practical.
You might have to try some different wire or twists to get the wraps down.
IMO its hard to replicate single builds into duals you should bite the bullet and try a lower ohm build, chuck some clouds brah.
Personally I like 7 wraps of .5 Ni80@3mm comes out around .25 and is a nice warm vape.

[striker42]

You squonking with the Dead Rabbit thebishman ?

[jtc]

2 ss claptons for that to shine 😄

[thebishman]

Dec 11, 2017 21:01:26 GMT striker42 said:

You squonking with the Dead Rabbit thebishman ?

I havent tried too yet mate

Have you tried it?

Its for mechs jtc btw


Phutumskiwunkumst, im sure i cpuld get a similar vape from dual coil that i do with single???

[jtc]

Dec 11, 2017 21:30:23 GMT thebishman said:

Dec 11, 2017 21:01:26 GMT striker42 said:

You squonking with the Dead Rabbit thebishman ?

I havent tried too yet mate

Have you tried it?

Its for mechs jtc btw


Phutumskiwunkumst, im sure i cpuld get a similar vape from dual coil that i do with single???

Yes
So a 0.11 dual what I use should be fine?
You'll be a cloud chaser 😂😄😲

[thebishman]

Dec 11, 2017 21:36:19 GMT jtc said:

Dec 11, 2017 21:30:23 GMT thebishman said:

I havent tried too yet mate

Have you tried it?

Its for mechs jtc btw


Phutumskiwunkumst, im sure i cpuld get a similar vape from dual coil that i do with single???

Yes
So a 0.11 dual what I use should be fine?
You'll be a cloud chaser 😂😄😲

Lol yeah brooooo check my clooooooouds out brooooo lol

Ill add that idea to the list cheers jonny. Only tried stainless once.. found it had a funny after taste.

[jtc]

I find that with all coils when they brand new tbh. I'm at 70w with my duals and it's spot on in the pulse24 for me. Not exactly cloud chasing but a good amount,plus my batteries last really well

[thebishman]

Dec 11, 2017 21:42:40 GMT jtc said:

I find that with all coils when they brand new tbh. I'm at 70w with my duals and it's spot on in the pulse24 for me. Not exactly cloud chasing but a good amount,plus my batteries last really well

Ah ok. I dont get any taste from kanthal. Or maybe ive used it for so long i dont notice it.
That taste from stainless was really off putting

[jtc]

I'll send you a strip if you want to try. It's thinner than the last stuff I sent you. Easier to work with, higher res and ramps up nicely for me

[jtc]

Yeah I always get a new metal taste on any new coil. Nickel the worst for me as I really taste that stuff, yuk

[thebishman]

Dec 11, 2017 21:46:35 GMT jtc said:

I'll send you a strip if you want to try. It's thinner than the last stuff I sent you. Easier to work with, higher res and ramps up nicely for me

Ah brill that be decent of you thanks very much. Could save me from buying a reel if something i wont like! Lol ill postage!

[jtc]

Dec 11, 2017 21:50:19 GMT thebishman said:

Dec 11, 2017 21:46:35 GMT jtc said:

I'll send you a strip if you want to try. It's thinner than the last stuff I sent you. Easier to work with, higher res and ramps up nicely for me

Ah brill that be decent of you thanks very much. Could save me from buying a reel if something i wont like! Lol ill postage!

Definitely
PM me your address again and I will post it Saturday morning