First step into rebuilds

[decoy]

May 5, 2018 10:56:32 GMT Fagsareus said:

decoy kf3 mini arrived ......in comparison to the berserker mini it is much more difficult to build on the deck is tiny ...quite a fiddle ..for me .....I find it not so user friendly as the berserker but once done I'd say the berserker flavour is slightly better but the draw slightly more airy

the deck is a bit on the wee side and any wire over 0.3mm wont fit under the screws
for me the best placement of the coil is about 1mm or so above the air hole
when filling it dont forget to close off the juice control and the open it 2 full turns when filled
adjusting the airflow is a bit of a pain as its a grub screw hidden inside the tank but atleast once its set it dont move
undo the flat head screw on the 510 and pull it and the threaded  part of the base off and up in the hole were the screw was is a grub screw with a flat head
adjust this if you want more or less air(i found shutting it down just a little more than what you want seems to get it right when your firing it)
hope that helps
and if you dont get on with it send me a pm and ill have it off yer

[Fagsareus]

decoy Google was my friend I think I've watched every YouTube video on it .....in the end I completely removed the grub screw ...I've had more eliquids on me than in the tank due to forgetting to close the juice control and yes the deck screws wouldn't grip the wire .....but it sorted now ...will see how I go when I have to recoil it

[domesticextremist]

Thr good news is that you don't need to recoil very often if you have a simple round wire coil.
Just gently remove the old wick, dry burn and rewick.
I've had coils that last several months that way.
They do eventually break though.