MTL boro or bridge recommendations

[digicig]

Jul 17, 2024 18:02:13 GMT makavelisreturn said:

Mar 9, 2023 1:39:55 GMT ticktockman said:

Dipping my toe into boro tanks and looking for a good MTL / loose MTL recommendation 
I've done a bit of research but could do with a bit of experienced input if anyone has any on the shortish list below 

VWM Dope
Psyclone X Susco
Mission XV Orbit
Vapesnail RBA
EVL Alien

Mission orbit with MTL kit? Bit on the high end price point but it's a fantastic vape and has a system to stop airlock to aliminate dry hits. I was very impressed with mine very close to my Kayfun regards to flavour 😀 

Kayfun BB?

[digicig]

something to add - the difference in integratedhybrid vs the lock nut + normal drip tip
for MTL - I seem to get a slightly tighter, smoother and maybe a smidgen more flavour when using the integrated MTL drip tip compared to the lock nut + a normal drip tip. think i paid around a fiver for one at the same time i ordered the Dope clone from 2Fdeal - so less than £20 for the 2

[digicig]

for comparison - have the SnailTank and Dope clone with similar coils and the same juice in my Cthulu and Stubby 21 - and have swapped them around including the integrated DT - similar AF set up too.

They're not too dissimilar tbh and would be happy with either as a Go-to MTL BB option

the OG VapeSnail is smoother but, the Dope clone send to give marginally better flavour - the OG Dope might be better but i don't have that and won't be chasing one.

[makavelisreturn]

Jul 17, 2024 21:04:26 GMT digicig said:

Jul 17, 2024 18:02:13 GMT makavelisreturn said:

Mission orbit with MTL kit? Bit on the high end price point but it's a fantastic vape and has a system to stop airlock to aliminate dry hits. I was very impressed with mine very close to my Kayfun regards to flavour 😀 

Kayfun BB?

Tempted to Try a Kayfun BB my only problem is every time I get a new boro bridge I get Tempted to get a new mod for it! I have been looking at the new vapers cloud DNA 60c?

Can the kayfun BB do RDL?

[digicig]

Jul 19, 2024 18:06:19 GMT makavelisreturn said:

Jul 17, 2024 21:04:26 GMT digicig said:

Kayfun BB?

Tempted to Try a Kayfun BB my only problem is every time I get a new boro bridge I get Tempted to get a new mod for it! I have been looking at the new vapers cloud DNA 60c?

Can the kayfun BB do RDL?

from what I've watched - the KF BB has similar AF as the KF X etc - so should be able too - but don't know for sure. I noted that the Clones come with all three chamber options - but the screw on deck just put me off. Should have the Bamtam BB MTL BRIDGE bridge in the next week or so - looks like they 'developed' a similar AF screw system to KF - but the deck just popsv out - actually more expensive than some of the KF clones - but 'Authentic' 🫣
also tempted by the Auguse Mohist BB though

[phtumshk]

According to the smovesto site 1.8mm is the largest it will go on airflow.
i like it a tad looser than that tbh
The clonefun i have is like a maccys milshake compared to my other rbas.
But it might be a mile away specs wise compared to original?

[digicig]

the SXK Bantam Bridge arrived today - with the KF style AF screw thing - no video available that i discovered in English to help. Build quality is really good for SXK as it's 'Authentic' 🫣

unlike the KF BB - easy to take apart as it's all held in place by o-rings and not threaded.

undo the 'Beauty ring' on the bottom to reveal the 510 threads - won't necessarily fit on all 510 based mods though

straight forward to build and wick - take a few test pulls before adjusting the AF screw to taste - and pop in in a tank. and Mod to try. Easy to adjust once in place if necessary.

Flavour is good but not outstanding
like the small tweaks that are possible for the AF

the KF clone is available cheaper - and with the 3 different chambers - just didn't wish to have to unscrew the chambers to tweak the coil or re-wick etc

[phtumshk]

Jul 25, 2024 17:24:32 GMT digicig said:

the SXK Bantam Bridge arrived today - with the KF style AF screw thing - no video available that i discovered in English to help. Build quality is really good for SXK as it's 'Authentic' 🫣

unlike the KF BB - easy to take apart as it's all held in place by o-rings and not threaded.

undo the 'Beauty ring' on the bottom to reveal the 510 threads - won't necessarily fit on all 510 based mods though

straight forward to build and wick - take a few test pulls before adjusting the AF screw to taste - and pop in in a tank. and Mod to try. Easy to adjust once in place if necessary.

Flavour is good but not outstanding
like the small tweaks that are possible for the AF

the KF clone is available cheaper - and with the 3 different chambers - just didn't wish to have to unscrew the chambers to tweak the coil or re-wick etc

That bantam has a similar deck to the kayfun but i much prefer the side wicking holes on the bantam for sure.

the kfbb has 4 teeny holes underneath a lot like the deck on the kf 5.(shudders as i remenber that beast lol)

I had to set about my kfbb with a file to add some extra air flow, have now got a nice pull on it.

Now I can get a vape out of it i can check if theres any diffrrence with the 3 chambers.

In a bit!

[digicig]

Mar 9, 2023 1:39:55 GMT ticktockman said:

Dipping my toe into boro tanks and looking for a good MTL / loose MTL recommendation 
I've done a bit of research but could do with a bit of experienced input if anyone has any on the shortish list below 

VWM Dope
Psyclone X Susco
Mission XV Orbit
Vapesnail RBA
EVL Alien

az you first posted as to the specific items.
VWM Dope Clone - easy enough to build, and the built in 510 connector is a huge plus - but fiddly to put together - best flavour of the BB's I've used and a good MtL

Original VapeSnail - really easy to build, the removal of the AF connector to insert the 510 adapter is a pain though
Smoothest MtL draw and the most used of the BB'S I have
- flavour is good but the Dope just edges it
The Stubby rbta - as is - great for DL - without the MTL kit the best you can get, including using the smallest AF, and removing 2 of the SS wicks (plugged with BluTak) and partially convering the front AF is a RDL - but good flavour and smooth vape with a 6/7ml tank.

[digicig]

FumyTech BD Vape Droid BORO RDTA - ECIGONE
Finally found a standard size RDTA Boro tank that gives a MTL vape and a nice R/DL out of the box - easy to build and wick and doesn't seem to leak even if left on its side - which with the Damn Vape Nitrous Zaion AIO having it's USB C port on the bottom is a huge plus.
Damn Vape Nitrous Zaion AIO + Droid RDTA and I've found my new go-to travel vape set up 🔥

[digicig]

FumyTech BD Vape Droid BORO RDTA - ECIGONE
Finally found a standard size RDTA Boro tank that gives a MTL vape and a nice R/DL out of the box - easy to build and wick and doesn't seem to leak even if left on its side - which with the Damn Vape Nitrous Zaion AIO having it's USB C port on the bottom is a huge plus.
Damn Vape Nitrous Zaion AIO + Droid RDTA and I've found my new go-to travel vape set up 🔥

[digicig]

Mar 9, 2023 1:39:55 GMT ticktockman said:

Dipping my toe into boro tanks and looking for a good MTL / loose MTL recommendation 
I've done a bit of research but could do with a bit of experienced input if anyone has any on the shortish list below 

VWM Dope
Psyclone X Susco
Mission XV Orbit
Vapesnail RBA
EVL Alien

my recommendation thus far - for ease of build, maintenance and MTL/RDL vape quality - and lack of Faff/Mess - has to go to the Droid RDTA (currently using the AF with 3 holes) - only slight negative is it requires a 510 adapter. Can quickly check the coil and the cotton only seems to need changing every 3+ days 🔥
For stock coils - the Shift Boro from Vaperz Cloud offers the best options for Coil ohm variation (above 0.8, whereas the BP Mods stock coil Boro tank didn't work with above 0.8 at all - and seems to fit most manufacturers coils I've tried thus far) and AF - currently have a Vaperesso GTX coil registering 1.27Ohms and enjoying it af a loose-ish MTL - could go a bit tighter if required too.
these would be my recommendations and what I'll be mainly using going forward - the Droid in the Nitrous AIO, the Shift in me Cthulu and with the Stubby AIO and the MTL kit for home use

[digicig]

new order from 2Fdeal: Mods House Ghost Style Boro RBTA
looks good - price too - and Todd's review of the original should work for MTL RDl and DL options
less than £25 inc delivery
so far, I'm enjoying the less hassle and mess of RDTA Boro tanks - only need to be rewicked every 2-3 days, and no worrying about juice when you do wish to re-wick or throw on a new coil.

[digicig]

2fdeal Ghost RBTA type Boro tank arrived yesterday
saw the original reviewed by Todd and when i saw 2Fdeal (Doris) had a clone was in like Flynn.

warning - there'll be a learning curve - but not that steep if you've used RBTA's before

instead of having 2-4 SS cable or mesh wicks - the Ghost has a central pillar wick - so the wicking is a tad different - but in practice - once set-up correctly - is actually superb

AF options are decent - although a 1.0 would have been Awesome for me - the only real negative is that they are popped in the hole below the coil - so can't really be changed without removing the coil. However, you can adjust a wee bit as there's also AF pins from the base which can be changed.

The Ghost can give a tight (to me) MTL to a loosish RDL - with great Wicking and flavour.

This is the first Boro tank system I've tried that also gives the Depth of vape experience i get from a full RTA tank . That is to say, enjoying the Droid RBTA, and then switch to an MTL RTA and can feel the difference in the draw (what I've called Depth)

Negatives at a push
510 adapter - aside from the potential of losing or forgetting it - mine has an occasional connection issue
the learning curve - aside from the AF combination of top and bottom - the wicking is a tad different so using the right amount is essential to beat performance
neither of which are that bad tbh

First day's impression: easy to build on, great flavour and AF options, once the wicking is sorted - never a dry hit - and the depth of the vape comparable to a good RTA
Can see this replacing the Droid as my Go-To Boro Tank 🔥

[digicig]

currently settled on a pre-made standard round Kanthal A1 coil - 1.10 Ohms - 1.2mm AF on top and the 2.5mm on the base - fantastic Slightly loose MTL with a wonderfully smooth draw - and great 'Depth' remindinge of an old Kayfun Lite - but from a Boro tank 😍🔥☯️

FYI
recommend Todd's or Vaping Bogan's YT of the Original Ghost RBTA fur help with getting the wicking right - and repeatably so - then this clone is really, really good 🔥