enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 18, 2014 23:31:54 GMT
I've mostly just been buying the caramel blend and the toffee from joosejuice ready made, it's still bogof on the 30ml bottles anyway so £10 for 60ml delivered and it tastes better than my efforts lol
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 18, 2014 22:33:55 GMT
I love sub ohming, love the clouds of vape and huge flavour, don't mind the nic rush either and at 24mg it's quite good.
Gonna set the origen up with SS wire rope and 0.5mm dual coils next I think
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 18, 2014 21:48:58 GMT
There's only about four companies that make the batteries and the rest are just wrapped in a different label, I suspect they're probably some dangerously labelled things. Like the efest things, the 30 amp ones are sony vtc's which is fine but the 35 amp ones are actually wrapped 20 amp LG's
Personally I'd be pretty suspicious of any such claims as a 50 amp battery for now until at least more info started to appear on line amongst vape groups and in battery tests.
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 18, 2014 20:14:47 GMT
A single micro of something like the 28G (0.32mm), wrapped 10 times round a 1.6mm needle or bit will give you around 1.3 ohms, line the coil directly in line with the air hole on the top cap, makes a big difference. Use a tiny piece of cotton, thread it through and pull it back and forth a few times to make sure it's not to tight, trim the ends leaving just enough cotton to lay down the sides even under the coil a little but make sure there's plenty of room around the coil. Try that and see how it goes. I'm not familiar with the igo L but I wouldn't stick dual coils in anything that doesn't have dual air holes, air flow is pretty important. Some cracking gems of info there mate, when i thread my wick i am defiantly doing it way tighter than you describe, there is no pull backwards or forwards ...its firmly wedged in place .... think i also might have to much wick in the bowl itself, going to try what you say ...will report back ....thanks for all the replies guys ...thats why i love this site It's just learning as you go, I went through quite a few rubbish attempts but have learnt a few things along the way. Got a lot of help on here and also watched a lot of YT vids and trial and error of course lol
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 18, 2014 20:13:02 GMT
Yeah heard alot of that online blakey. Plus net has it's moments and often buffering with itunes is rubbish.. Don't know why that is Jane Plusnet have been consistent with me, I can phone them at any time too day or night and get good service. I've had engineers round a few times looking for an intermittent fault that has eventually been found thankfully but yeh, always really helpful and usually sort any issues out fairly quick. The actual router you use in the house can have a big impact on your line speed too, sometimes it's good to just switch it off and leave it unplugged for a few hours. It's like info gets confused between it and the exchange or something but leaving it unplugged for a bit is good way to reset it thoroughly. A neighbour was with BT but had endless problems, she has now switched to plusnet and her internet has never been better especially for such a long length of time. We're out in the middle of nowhere as well so if they can give us decent internet then it's impressive. I'm actually at the max limit from the exchange myself.
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 18, 2014 19:09:40 GMT
Tell plusnet what you can get and see if they'll at least match it. You wont be on a contract with them unless you started a new one after the original ran out, if not then you're just using their service but not actually contracted. You can often swing a better deal when starting a new contract too.
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 18, 2014 19:06:34 GMT
Hi guys, So i have had an IGO-L for a while now and although i like it, i have never LOVED it, i use a 1.5ohm micro coil with organic cotton wool balls for a wick and although it gives an okay vape its not much better in terms of flavour and clouds compared to my Aerotank or Protank 2 So i was thinking about making a dual coil for it but the only battery i have is an Itaste VV Surely a dual micro coil will give me twice the amounts of vapour and flavour than i am currently getting right ? but what kind of ohms will 2x 1.6ohm micro coils come out at and more importantly can a itaste VV run this kind of contraption. Should i be making 2x 0.75 ohms coils to give me a total voltage of 1.5ohms ?? Hahaha this rebuilding lark is never easy and i love it but just asking for a few opinions before i get started, any kind of help would be amazing A single micro of something like the 28G (0.32mm), wrapped 10 times round a 1.6mm needle or bit will give you around 1.3 ohms, line the coil directly in line with the air hole on the top cap, makes a big difference. Use a tiny piece of cotton, thread it through and pull it back and forth a few times to make sure it's not to tight, trim the ends leaving just enough cotton to lay down the sides even under the coil a little but make sure there's plenty of room around the coil. Try that and see how it goes. I'm not familiar with the igo L but I wouldn't stick dual coils in anything that doesn't have dual air holes, air flow is pretty important.
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 18, 2014 17:01:40 GMT
You'll need to find a way of knocking it straight, don't try and unscrew it or you'll kill the threads. Stick the other end of the tube on a hard surface with a bit of cloth under it to protect it then use maybe a screw driver and hammer and gently tap it to get it back on the right thread.
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 18, 2014 2:49:52 GMT
He probably took one look at the hot blonde in her underwear, and like every other man in his position thought "I'm missing the football!". Some of us men don't actually like football
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 17, 2014 22:05:46 GMT
Hi Snow, hope your okay. If the ecig was a button job, could it not be that while your driving that the button might of been firing while you was sitting back. Hi stamina yeah I'm good thanks, no the battery was definitely not firing, I have done that a couple of times - including at a meeting when I leaned forwards and mashed it against the desk and then wondered why I was crackling and fizzing lol the sun coming through the glass was pretty fierce this evening, my in car temp was reading 28 degrees with the sunroof and windows open! The actual metal C ring on the lanyard was boiling hot to the touch as well as the battery. I tried just holding it in my hand but thats not ideal when driving and I didn't want to put it on the passenger seat as thats still in sunlight - I used to have to put my lighter down in the cup holder when I had stinkies in the car for the same reason. Mine sits between my legs when I'm driving, not sure that would work for a lady though lol
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 17, 2014 21:46:34 GMT
Do I need a kayfun mini in my life No, because then you need to fill kit more often, what you really want are more drippers, mech without kick, sony vtc4's and some proper low ohms
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 17, 2014 19:30:59 GMT
I think they are designed with anti Sarah device ... I think it's you that has the anti Sarah but we still have faith in your abilities
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 17, 2014 17:56:53 GMT
I've given up with mine. Going to flog them on. Nothing but a PITA Hey up Spikey, what's gone wrong? What part of the whole thing are you struggling with?
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 17, 2014 17:55:17 GMT
lmao kayfun guru im not but drilling and tapping the hole isnt a problem ill line up the holes as well and then you can tell if it stops/cuts down the whistle the wicking vid was @enjays find and i loves it just seems to work with v little fuss ,i just wish i didnt vape a tank cracker as my all day vape decoy or enjay have you got a link to the video still please? I've always open to learning. Here you go
|
|
enjay
Super Member
Joined:December 2013
Posts: 2,372
Location:
Likes: 1,113
Recent Posts
Last Online Sept 22, 2024 21:38:04 GMT
|
Post by enjay on Jun 17, 2014 13:35:48 GMT
Just wait, you'll be wrapping all sorts of coils now ha ha, it's very addictive
|
|