virus2k
Full Member
Joined:March 2014
Posts: 194 
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 16, 2014 1:14:08 GMT
What does the instruction manual tell you virus2k, usually the sequence of blinks indicates the problem. Was your previous charger ok? With the same batteries? It's entirely possible you have a faulty charger but the nitecore is generally considered a good one, I've been hammering mine for a year virtually 24 hours a day. Instructions are pretty crap imho... english chinasian lol but basiccly when its working correctly when you put a batt in the blue power light stays fully lit and does not dim then the orange lights run and test then start to charge blinking 1 then 2 then 3 then repeat.... now in the instructions it does not tell you what blue led dimming means or why all 4 bays orange leds all blink at the same time. this is with only 1 bat in the first slot i have tried all slots just the same. also there is version 2 of this charger out i think i ended up with version 1 lol also i cant check the authenticity of the charger as there is no serial number on the back of it to see if it matches up with the serial number on the box. ;/ arghhh so annoying cause its the only charger i have and also being new to vaping i have had no previous chargers to test if its the batts... but 2 of them acting up at the same time is pretty slim at that. |
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 16, 2014 1:04:50 GMT
You sure it's not your batteries that are defective? That charger is known to be spot on, never had the slightest issue with mine and I use it every day, sometimes twice with using the 18350's lol. The batts are brand new from ecig cabin aswell ???? 2x [561] Panasonic NCR18650B 3400mAh 3.7V 18650 Lithium Batteries www.ukecigcabin.com/product/panasonic-18650-3400mahgot those aswell ??? surely both batts are not broken ???? as the charger does the same behavior with either battery :/ |
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 16, 2014 0:55:52 GMT
Just got it from ecig cabin 4 days ago  and its already dead or playing up or completely breaking my panasonic 186050b 3400mah batts i use them in my smok vv/vw mod and when the smok says LOW VOL i take one out and power on the charger and place the bat into the charger then it starts charging. here is where it get weird. sometimes the charging orange led will stop and the blue power led will blink then the 3 orange leds blink then it repeats that for ages... i have to take out the bat and put it back in then it starts to charge normal again and it will repeat the same crap after a wile. now all the lights where blinking again after some time and blue power led was blinking and i took it out and put the bat into my smok and checked voltage it said 3.9v but on a full charge i usally get 4.2v so took it out and put it back in the charger and now i cant even get it to charge. just blinking blue led with all slots leds blinking orange on and off and on and off and blue led blinking. what a waste of money this charger is and i was recommended it from members on these forums, i must be very unlucky... |
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 16, 2014 0:49:16 GMT
That's why they have testers for 50p or so. Or are you actually looking for freebies? yeah was looking for freebies  from people stuff people dont want so i can test before buying 30ml and 100ml bottles of it |
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 16, 2014 0:31:51 GMT
Had a lot of similar responses. Unfortunately I dont have means of receiving payment other than cash on collection. You must have a bank account ? thought everyone had one of those... or parents with a bank account..... can transfer the cash right into there bank with account/sortcode/name presto instant payment. never mind then lol going to have to find this provari on the black market hahah |
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 15, 2014 23:09:16 GMT
thanks for the link ;P but my issue was not knowing where to get them was knowing what ones to taste before i buy them lol
|
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 15, 2014 23:04:40 GMT
erghhh lol i would have taken it tonight if you had a delivery option lol |
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 15, 2014 3:24:37 GMT
can a mod delete this thread please.....
i have the website to get tasters now lol
ta
|
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 14, 2014 22:18:57 GMT
hmm thinking and thinking and thinking hmmmmm
would you accept 110 ??? with cheap@chips postage lol
|
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 12, 2014 0:29:38 GMT
wow im totally loving the flavor of my orange ticktac 18mg 100ml bottle ejuice with my Smok VV/VW mod really is a great mod and how great is aerotank though i ran into a issue with the tank i managed to screw the tank to the smok and for some reason i was then unable to get the tank off was a complete mission to unscrew it LOL i ended up scratching the steel on the end of the tank to remove it and under that is what looks to me like copper i thought these where stainless steel WTF lol anyway i managed to get it off and checked the resistance... its showing 2.0ohms but it shows 2.1ohms aswell depending on how loose or how tight i screw it to the mod very strange, shows in the book that these attys should be at 2.1 so weird that its fluctuating between 2.0 and 2.1.... and also my first order with ecigcabin and they sent all the stuff and it all works but they sent me the wrong ejuice :/ i picked 2x 18mg 10ml bottles of L&B special offer for £7 and what i got instead was 2x HANGSEN Rainbow 18mg 10ml bottles instead lol The vapor and flavor though that i get from the mod and ticktacs is utterly fantastic really great infact i can taste the flavor near enough lol now here is question for you guys/girls this atty runs at 2.1ohms and requires 3.7-5.5v optimal now if i run it at 5.5v will i burn out the dual coilwick ??? or can i run it even higher than that without risk of burning the wick/coil out ? i read on these forums that its best to run this mod in watts instead of volts whats the max watts in comparison to voltages 3.7-5.5 ? as people say you get better power ratio using watts. |
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
newbe
Mar 11, 2014 12:34:55 GMT
Post by virus2k on Mar 11, 2014 12:34:55 GMT
ha provari is on my hitlist to after i have had more play with my nemi oh and welcome to the forums i am new here also and trust me you have come to the right place lots of great helpful guys/girls on this forum the vast information around here will enlighten |
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 11, 2014 12:06:22 GMT
If you put it in vw mode or power as sometimes known you don't need to worry vv is more fine tuned ah guess its the norm then to expect slight imperfection even with real and not clones lol ok about my question before... can anyone tell me the max safe Thanks  ok if i select V/Watts mode what do i select as the highest i can go to without burning out the 2.0ohms dual coil/wick ???? and for future reference if i select v/voltage it says to put it between 3.7-5.5 for normal operation but at 5.5 will the coil/wick burn out on a 2.0 coil with that as the max or can i even go higher without risk ??? so new to this going to have to read up more i guess lol |
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 11, 2014 11:19:57 GMT
well guys my packages turned up from ecigscabin today HOLY WOW what a difference in vapour and taste on the smok + aerotank compaired to the c4 amazing though for some reason my smok vv/vw has imperfections on it 1 small scrach and 1 small ding like scratch there very small but you shouldnt expect this when buying brand new though does not interfear with the performance of the product. now just to make sure i have this right being a vv/vw device i do not need to worry about the ohms ect value and only the power value right currently i have it set at 5.0 says on the coil/wick that i should run that at 3.7-5.5max voltage anything higher and i will probably burn out the coil or wick right ???? just want to make sure what the lowest and highest i can go for flavor and vapor and not have to worry about my wick/coil burning out .... cheers again guys ohh and also i bought 2x L&B 18mg 10ml bottles but i ended up with completely different bottles kinda pissed off about that any hoo the device is working correctly and with the aerotank i got 1 dual wick and 1 spare and also 2x boxes of 5x dual wicks so i have 11 spare lol |
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 10, 2014 23:34:04 GMT
Nope virus2k you have acute shinyitis... One day like nicotine addiction this too will be in the medical books  HAHAHA |
|
virus2k
Full Member
Joined:March 2014
Posts: 194
Location:
Likes: 38
Recent Posts
Last Online May 21, 2016 1:18:57 GMT
|
Post by virus2k on Mar 10, 2014 13:17:27 GMT
Maybe get a kick to go with mech mod,adds a bit of safety and can change wattage too HI mate i thought i already did order that from fasttech... ah here it is presumably this is what your talking about if so then yes already ordered it and payed just waiting lol line total $16.66 Variable Wattage Kick Module for Mechanical Mod / PV Kick Module(VW) / SKU: 1501000 Price $8.33 QTY 2 Scheduled Ship Date: 3/25/2014 ------------- haha i got 2 of them lol think im loosing the plot |
|
from people stuff people dont want so i can test before buying 30ml and 100ml bottles of it 
ok if i select V/Watts mode what do i select as the highest i can go to without burning out the 2.0ohms dual coil/wick ????