bradkb
New Member
Joined:October 2011
Posts: 2
Location:
Recent Posts
Last Online Sept 11, 2012 23:03:14 GMT
|
Post by bradkb on Jan 19, 2012 3:36:51 GMT
Use the Murata OKR-T/6-W12-C, together with a 200 ohm pot and a 220 ohm resistor, allows the voltage to be adjusted from 3.3v all the way to 6v. Very nice to use, and very easy to stealth vape with.
|
|
bradkb
New Member
Joined:October 2011
Posts: 2
Location:
Recent Posts
Last Online Sept 11, 2012 23:03:14 GMT
|
Post by bradkb on Jan 19, 2012 2:35:44 GMT
Hey all, Wife wanted a better mod, and I wanted one that was easier to pocket, and I had a couple of friends ask me to make them some as well, so I got a load of 3XAA boxes, some OKRs and a load of bits. The biggest challenge was the switch, I wanted a tiny switch, comfy to press, no effort, but no missing, and I found a lovely tactile switch, it sticks out probably 3 mm, and using the control pin on the OKR, works fab. 2 X 14500 900mah batteries last me about a day and a half, which as a heavy vapor is quite good. The atty connector is a 510 shorty with nut, and have sealed the top in hot glue, there is an LED in there, and a hole through to the top, so when its on there is a nice blue glow, not too bright to blind ya. The voltage is adjustable from 3.3v to 6v and there is absolutely minimal voltage drop under load.   |
|
