vapingthings.com - stock update

[vapester]

hey all,
some new additions to the site:
bauway long wick ce4 with 510 compatible drip tip, available in standard and low resistance
www.vapingthings.com/BAUWAY_2ML_EGO_CE4_WITH_510_DRIP_TIP/p1311952_7330185.aspx
6ml dct tank with a new style filler-free cartomiser. cartomiser is flanged with 4 pre-drilled holes and features a horizontal coil (apologies in advance for the close up pic!)
www.vapingthings.com/6ML_DCT_TANK_WITH_NEW_STYLE_CARTOMISER/p1311952_7333318.aspx
thanks
j

[vapester]

hi again,
ce3 xl vs (phoenix) bottom-coil clearomisers available in 3 resistance levels (2.4-2.6, 2.6-2.8 and 2.8-3.0 ohms)

www.vapingthings.com/CE3_XL_VS_PHOENIX_BOTTOM_COIL_CLEAROMISERS_-_5_PK/p1311952_7225750.aspx

[/img]

[fagin]

Some kudos. I managed to get my address wrong, they picked it up off my Paypal address, emailed me to make sure, and still got my purchase to me really quickly.
Good communication, good service.

[jax]

Excellent service!

Within an hour of ordering yesterday, J telephoned me to check the delivery address as it was different to my Paypal address (was a neighbours address as I knew I would be at work). I confirmed the delivery address was correct and received an email 30 minutes later to say goods were dispatched.

Vapemail was received this morning

Thanks J!

[vapester]

happy to hear your orders arrived safely fagin and jax
a small stock update if i may
mini ego batteries (350mAh) and a tiny, shiny, variable voltage fixed passthrough
[img src="[/img]"]
thanks for taking the time to look
j

[vapester]

links:
www.vapingthings.com/350,_650_AND_1100MAH_BATTERIES,_EGO_TYPE__799_-__1149/p1311952_7047559.aspx
www.vapingthings.com/-PASSTHROUGHS/cat1311953_1388249.aspx
[img src="[/img]"]

[motormadfrosty]

That tiny, shiny mini passthrough looks awesome

[azzie]

Jul 21, 2012 18:23:48 GMT motormadfrosty said:

That tiny, shiny mini passthrough looks awesome

...it looks interesting, I`ll have to order one

[timnowvapes]

Jul 21, 2012 17:38:57 GMT vapester said:

happy to hear your orders arrived safely fagin and jax
a small stock update if i may
mini ego batteries (350mAh) and a tiny, shiny, variable voltage fixed passthrough
[img src="

[/img]"]
thanks for taking the time to look
j[/quote]

That would have been perfect for just dry burning, I've just done 4 clearomizers, and it would have been perfect, book mark time

[tillis]

Jul 22, 2012 21:53:00 GMT azzie said:

Jul 21, 2012 18:23:48 GMT motormadfrosty said:

That tiny, shiny mini passthrough looks awesome

...it looks interesting, I`ll have to order one

Yes just ordered a vv passthrough ~ price looked good, and you never know.....

[Malibu]

Think I will have one too, I don't have a passthrough and spend too much time on here.

[DiscoDes]

Re the passthrough:

Not wishing to rain on anyone's parade but I think you'll need to check what current input this may need? If it does not contain a battery then you are limited to the maximum current that the USB can provide. If it does not have a battery then I would not put this in a PC/Laptop USB port.

[Brian]

The last thing we need is more rain Des.
However, Are you saying it will give out more than 3.7 volts? As was thinking of getting one, but all my ce4s etc are set up for an ego and other lower voltage devices.

[azzie]

Using one at the moment Des ( with a vivi nova on it ) and its fine, there isnt a battery but im not so sure, I may be wrong but it was listed as 350mAh battery.

If its limited to usb voltages it should be ok, doesnt usb3.0 have a 5v dc output?

Edit: misread what J posted, so it doesnt have a battery

[DiscoDes]

Jul 24, 2012 17:27:05 GMT Brian said:

The last thing we need is more rain Des.
However, Are you saying it will give out more than 3.7 volts? As was thinking of getting one, but all my ce4s etc are set up for an ego and other lower voltage devices.

No it's not the voltage it's the current that the passthrough will be drawing from the USB port on a PC/Laptop, the maximum these are supposed to supply is 500mA which is well under what most atomisers require. You stand a much higher risk of buring out your computer.

If you connect the passthrough to a USB power supply then the current is limited to what that can supply typically 1A or 2A.

A 2.4 ohm (SR) atomiser draws 1.66 amps at 4 volts.
A 2.4 ohm (SR) atomiser being run at 5 volts draws just over 2 amps.

A 2 ohm atomiser draws 2 amps at 4 volts.
A 2 ohm atomiser being run at 5 volts draws 2.5 amps.

Be careful! is all I can say.