grrrr help anyone?

[Deleted]

my zmax had a bit of a dodgy centre pin and so i thought id remove it and wrap it in ptfe tape but it was soldered to a wire and now i've broken the connection, does anyone know how to take the guts out so i can solder a longer piece of wire to the existing one in order to fix it back to the centre pin as the wire that inside is too short

any help would be greatly appreciated :-[

[Sandra (aka Chillax)]

Nooo staf

YouTube it, maybe someone has stuck it on there?

[Deleted]

good idea

edit: just checked, its nothing but reviews

[raid2506]

Can't you just solder directly to the short wire that's already there?

[Deleted]

it seems to have some industrial covering that wont come off to expose enough wire to solder to

[Chrissie]

Really wish I could help Staf Hopefully someone will come along who can.

[maccafan]

Send it to me Staf..I will sort it and post it back along with your Maximus pro which I received today.

Is this the V1 or V2 Zmax?

[ChillerVapes]

It "looks" like it's been forced together much like the LT chrome. If that's the case, you could attempt putting a cone or mega ego tube on the end and VERY GENTLY wobbling it side to side while pulling. It works for Ego's.

Other people have managed to open LT chrome's by putting something very thin into the joint and lifting it around the edge bit by bit although I'm aware that it can be a pig to put back together.

Or just send it to macca lol

[raid2506]

It might be time to man up and buy a dremmel and some epoxy, lol

[Deleted]

Dec 12, 2012 21:33:05 GMT maccafan said:

Send it to me Staf..I will sort it and post it back along with your Maximus pro which I received today.

Is this the V1 or V2 Zmax?

v2